Since outdoor space is limited in a big city, everyone knows you must make smart use of vertical real estate. For a greenhouse/shed in San Francisco's Bernal Heights, Step 3 Studio designed in open-framework structure that provides shelter for a garden shed that stores potting materials and plants on the ground floor. A steel staircase was built on site, which leads to a second level surfaced in steel grid mesh. The higher elevation is the perfect spot for container plants that require more sun. It's also a nice place to hang out and enjoy views of the city, day or night.
This tiny office space is perfect for those times you need to get away and focus on some important work. Whether you are a work-from-home person or an individual that has a freelance side gig, it is always great to have a space that is just for you and getting your work done. Once you have created this space, your mindset will automatically be in work mode every time you enter it.

This garden hut shed is practically growing into the scenery. The hut is sheer nature, as depicted by the garden growing off the roof of the structure. This shed has undoubtedly been in this surrounding for a while, but that does not diminish the function of it. If anything, the charm of this shed surpasses the time this tiny shed has probably spent on this hillside.
Our panels are all SUDs compliant and made to comply with the Flood and Water Management Act 2010; this means that, unlike other shed bases, surface water build-up and risk of flooding is significantly reduced. Not only that, a plastic shed base is unable to retain water which means that there’s no risk of damage to the base or of water collecting and causing damp on the bottom of your new shed.
The idea for this has been in my head for a while (and on a paper for a shorter while), but let’s face it: I need more DIY space — especially for tools and garden storage. The one-car garage I have is packed full all the time with the mower, gardening materials, woodworking tools, paint, and more. Even though I try as best I can to keep it organized(ish… meh) by cleaning it out once a year, that still means I spend a lot of time looking for the things I need in a very tight space (you would think losing things in a smaller space would be less frequent, but… nope).
We’re using tongue-and-groove LP ProStruct Flooring with SmartFinish for the shed floor. Fasten the first sheet in the back corner with construction adhesive and deck screws. Finish the row with a half sheet. Then start with a full sheet from the opposite end so the seams between sheets are staggered. The photo above shows how we installed the flooring. Learn more in-depth instructions for how to install flooring here.

This step is easier with two people. Start by measuring the length of the ceiling then cut the amount of straw cladding you need – allow a 5cm surplus.  You will need two lengths.  While one person holds the straw cladding in place the other can nail it in place. Hit the nail in until secure then hammer it at a 90-degree angle so it holds the straw cladding in place.  Put nails in every 15-20 cm to secure.
Beauty is powerful. Even in an aged setting or with old material, beauty can still ooze out. In fact sometimes the agedness enhances the beauty. This is especially true with this old shed. While its waterwheel idea and the old wood may go back years, its beauty is still worth crediting. Some of the old things in life make great garden shed ideas. IDEA: Create a garden environment with old things such as a waterwheel.
Strategies: It is vital to produce a degree and dried out foundation. It’s unfeasible to put with each other a get rid of whilst on an unsound basis, or else bolt holes attaching the wall structure sections won’t slide into line. For much more substantial structures especially in which the drop will be employed like a functioning region the full concrete floor base is most successful. Possessing mentioned that, typically there are two sorts of foundation ideal for an outside creating, take into account the two:
A concrete base is the most common type of base for garden buildings and are relatively easy to build, but most people will hire a reputable builder to install the base. A concrete base must be installed in advance of receiving you garden building, this ensures the base has properly set before the building is installed. If the base has not properly set a build up of condensation can form within your new garden building.
This garden shed takes its name very seriously. It’s placed in the middle of the garden and stands out with its cute white design. It’s a lovely addition to the landscape and it’s very functional as well. It’s great for storing all the garden tools and it also serves as a comfortable work space and a lovely area for relaxation and for entertaining friends.
This whimsical garden shed looks like something you would see in a “Lord of the Rings” movie. With its almost twisting structure sitting in the middle of this forest landscape, I am almost surprised I do not see a tiny Hobbit poking about with a pipe in hand. It is a truly gorgeous setup and this just goes to show how versatile these garden sheds can be.

Thanks again for reaching out to us. I spoke with our engineering department and your servicing branch. Our sheds are designed for typical storage. Transforming the shed into a livable space voids the warranty. Unfortunately, we cannot facilitate your requests. If you have any other questions, feel free to give our branch a call at (678) 797-5402. Have a great day!
This backyard barn storage shed is the perfect space to store all the essentials. Doubling as a functional space, this barn is adorable to look at. It adds class to an outdoor area and guests will surely notice this adorable mini barn sitting amid your backyard decorations. If you do not have a very large outdoor area, you can always scale down to suit your needs.
This adorable teak storage shed is perfect to sit on a patio or covered garden area when you need to just store some of the essentials, such as garden shovels, brooms, and rakes. Almost acting as a storage closet, this nifty space definitely does not take up too much space and can almost just blend into the background. This is ideal for a small garden area or even a side garden area that still needs a little bit of storage capability.
Simple shed designs like this one feature tongue and groove planks that are typically reserved for flooring or indoor paneling. The boards are designed to interlock along the long edges, making for an exceptionally sturdy structure. The best part is you can buy this type of lumber at your local discount hardware superstore in different lengths and a variety of different types of lumber.
*Please note the content in this blog post is intended only to provide a summary and general overview on building a pallet bar. It is not intended to be comprehensive. You should refer to the instruction and safety manual of tools and paints you use and seek professional advice if unsure of how to execute the tasks before acting or relying on any of the instructions.
Ok, now this shed absolutely looks like a tiny house! Everything about it is so adorable! This one even comes complete with quaint little flower boxes at the windows! Talk about charm and being functional! This shed brings the best of both worlds. This shed almost looks like a tiny colonial home all the way down to the tiny wreaths at the front of the door and the tiny chimney up at the top.
Using wooden pegs and string, mark out the exact base size required, being careful to measure both diagonals in order to get the area square. The is area can now be excavated to a depth of 3". This depth can vary depending on the thickness of slab used and the gradient of the ground excavated. Overall you're looking to achieve a thickness of 4-5cm of sand/cement mix and the slab on top.

These LED rail lights are the perfect, cost-effective way to light up an outdoor space without lightening the wallet. Whether you need a ton of lights for your next garden shed bar party or just a few to light up your child’s playhouse, these lights are great because all they need to use to work is the actual sunlight. No need to worry about batteries or extension cords when it becomes known! They do all the work for you.


Without the correct base erecting a shed can prove very tricky. It is extremely important that all garden buildings are constructed on a firm and level base which is constructed from the correct, durable material. Assembling the base incorrectly can lead to future deterioration of the product such as doors dropping out of square, thus becoming complicated to use or causing a water leakage.

Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.


Whatever technique is more fascinating, it is recommended that you’ve got received a two-inch (5 centimetres) leading all-about the bottom of your garden building. To determine the dimensions of foundation essential for the real creating you intend to construct, incorporate four inches to the whole foundation measurements to make sure an ample basis measurement.
Omit the bird’s-mouth from four rafters and use these on the ends. Cut the 2x4s for the ridge and subfascia to length and mark the rafter positions on them. Line up the rafters with the marks and nail through the ridge and subfascia with 16d nails to secure them. When the roof frame is complete, line up the subfascia with the chalk line on the platform and tack it in three or four places with toe screws to hold the frame straight while you install the soffit.
×