The new home and garden trend is sweeping the internet, and it's actually pretty amazing and doable. We've seen she-sheds, but this puts a different spin on making the most out of your shed. DIY bar sheds are popping up all over the place, and some of them are pretty darn creative. With a wide array of different options, this is one of the least daunting DIY home projects we've come across in a while.
It is easy to transform a garden shed into a stylish office space with so many design ideas out there. There are plenty of design platforms to help get you going, but when it comes down to it; your space should be uniquely you. Whether you prefer a more luxurious space or just need a space to gather your thoughts, your office shed should be a place you feel comfortable in.
This nifty shed sits on the back of the property instead of near the front. This way, the shed is out of the way since it is purely a functional shed. No chance of having a party in this joint since its excessively busy storing all the garden essentials. It even has a collection space for chopped wood, which is another cool way to use a garden shed.
When building the floor frame, which includes the mudsill, floor joists and perimeter band joists, use 2 x 6 or 2 x 8 pressure-treated lumber. Many prefab sheds use untreated construction-grade lumber for the floor frame, which is fine--if you plan to keep your shed indoors. Even in ideal conditions on the perfect site, a shed floor will be exposed to some moisture, and in time, untreated lumber will rot.
The post holes should be about 4 feet apart. Set up batter boards and mason's string to mark these points. The intersections of the string indicate the locations of a post corner. Use the 3-4-5 method described above to check for square at each intersection. Adjust the string along the batter boards as necessary and mark the location of the string on the batter boards.
You should then lay approximately 3” (75mm) of concrete. Concrete can be produced using either bags of dry mixed concrete with small amounts of water added at a time, or making a mixture of ‘all-in’ ballast, cement and water. For this second alternative, it is mixed in the ratio of 1 part of cement for 5 parts ‘all-in’ ballast. ‘All-in’ ballast is sold in 40kg bags at most building merchants or DIY stores (Note approx 1.25 will be required to produce around 1 cubic foot of concrete). Do not allow the mix to become too wet as this will weaken the concrete.
According to the Ryan Shed Plans PDF review updated by Vkool, this is a new revolutionary program that covers over 12000 advanced sheds building and woodworking plans. This system is particularly designed for those people who want to build amazing outdoor sheds fast and easily in just several weeks. Inside this e-course, people will discover different shed plans such as:
A 1964-built Eichler home was bought in original condition with vintage appliances, fixtures, and finishes. The new owners wanted to retain its iconic midcentury modern design, but requested that Gast Architects make some updates to create a calm, light-filled, and inviting home. Gast strived to preserve the signature finishes of the house while creating a larger, more modern kitchen, opening up the floor plan, and updating the master suite. The shed in the backyard repeats the lines of the main house, resembling a mini Eichler.
Cut the treated 6x6s to 12 ft. and set them on the gravel so they’re parallel and the outside edges are 6 ft. apart. On sloped ground, you’ll have to raise the 6×6 on the low side until it’s level with the adjacent 6×6. Do this by stacking treated 2x6s, 4x6s or 6x6s on top of the treated 6×6 to reach the right height. Use a 4-ft. or longer level to make sure the 6x6s are level and level with each other. Finally, square the 6x6s by adjusting the position of one 6×6. Slide the 6×6 back and forth, not sideways, until the diagonal measurements from opposite corners are equal. Build the platform with treated 2x6s, 24 in. on center, and cover it with treated 3/4-in. plywood (Figure B).
×