I am considering purchasing a 16×24 Everest Tall Barn and using it as a workshop/additional living space to include a full bathroom. For this reason, I am planning to run utilities to the building including natural gas, water, sewer, etc. Since there is no way of knowing where the floor joists will be, there is no way to know where to locate the sewer line for proper flow (connection location) through a concrete slab. Therefore, I was hoping to have a standard footer with craw space installed and attached the Everest on top of it (just like a house). This way I could access the utilities by removing sections of the floor so I could run the sewer line (and other utilities) to exact areas of the building. Is it possible to have the building constructed/attached on top of this type of footer system?


Sixty Stores Ltd is authorised and regulated by the Financial Conduct Authority (FRN 0662525) and acts as a credit intermediary. Finance options are provided by Divido Financial Services Limited in association with a panel of lenders who are authorised and regulated by Prudential Regulation Authority and/or Financial Conduct Authority. Finance available subject to age and status. Terms and conditions apply.
In a Vero Beach, Florida, midcentury modern neighborhood, Sanders Pace Architecture retained the lines and essence of the original house while redesigning it for their client's 21st-century lifestyle. Although it's at the front of the house and initially might resemble a garage, the detached "shed" can be used as a private studio or for guests. Because it's located on the coast, hurricane-proof doors were needed, but cedar was installed over them for an attractive but sturdy structure.
The lighting surrounding this garden shed is not only gorgeous but also soothing. This shed could be an outdoor sauna, what with the cool exterior and relaxing elements this shed incorporates. The structure itself is unique in design, so naturally, the unique lighting should follow suit. This great space has the beauty that is only amplified by such soothing, glowing lights.
1. Choose a location. You may have already completed this step but it’s good to put some thought into the location of your outdoor storage building. Check with your local township to make sure you follow setback guidelines. If installing next to a fence it’s a good idea to allow enough room between the shed and fence so that a person can squeeze through. Make sure the location can be accessed by your shed builder’s delivery equipment.
Beauty is powerful. Even in an aged setting or with old material, beauty can still ooze out. In fact sometimes the agedness enhances the beauty. This is especially true with this old shed. While its waterwheel idea and the old wood may go back years, its beauty is still worth crediting. Some of the old things in life make great garden shed ideas. IDEA: Create a garden environment with old things such as a waterwheel.
There are two 4×4 posts at the front of the shed that support the front half of the roof. Secure the bottom of the posts to the deck frame with metal post anchors. Tie the top of the posts together with the second (top) 2×4 plates that run over the top of the walls. Miter the ends of the 2×4 plates over the posts and attach them with screws (Photo above).
Since outdoor space is limited in a big city, everyone knows you must make smart use of vertical real estate. For a greenhouse/shed in San Francisco's Bernal Heights, Step 3 Studio designed in open-framework structure that provides shelter for a garden shed that stores potting materials and plants on the ground floor. A steel staircase was built on site, which leads to a second level surfaced in steel grid mesh. The higher elevation is the perfect spot for container plants that require more sun. It's also a nice place to hang out and enjoy views of the city, day or night.

When thinking about how to make a shed look nice, take a cue from the shed’s surroundings. Set among towering trees and winding stone paths, weathered wood and traditional cottage design elements befit this shed’s forest setting. The steely blue-gray door and shutters suit the design and a glazed finish gives the features a bit of dimension. Board and batten siding offers distinction to the simple form of the garden shed.
A 1964-built Eichler home was bought in original condition with vintage appliances, fixtures, and finishes. The new owners wanted to retain its iconic midcentury modern design, but requested that Gast Architects make some updates to create a calm, light-filled, and inviting home. Gast strived to preserve the signature finishes of the house while creating a larger, more modern kitchen, opening up the floor plan, and updating the master suite. The shed in the backyard repeats the lines of the main house, resembling a mini Eichler.
These sheds are perfect for small yards where space is scarce. If you plan on storing large items inside, make sure to install double doors. On the other hand, if you want to design it like a very small office, one door is enough. Lean-to sheds are generally used for storing tools like nails, screws, electric drills, gardening equipment etc., basically anything that fits. Lean-to sheds can be placed in close proximity to your house or other existing structure.
For the shed's floor deck, use ¾-in. exterior-grade plywood; anything thinner will flex between joists. (Note that a double layer of ½-in. exterior ply is okay, too.) If you plan to store heavy items, such as a lawn tractor or woodworking machines, consider using ¾-in. tongue-and-groove plywood. This costs slightly more, and is a bit more troublesome to install, but its edges lock tightly together, creating a rock-solid, rigid floor. In areas with excessively high moisture and large numbers of wood-boring bugs--such as Florida, Alabama and the other Gulf Coast states--consider using pressure-treated plywood for the floor deck. It's particularly resistant to moisture and insects.
Simple shed designs like this one feature tongue and groove planks that are typically reserved for flooring or indoor paneling. The boards are designed to interlock along the long edges, making for an exceptionally sturdy structure. The best part is you can buy this type of lumber at your local discount hardware superstore in different lengths and a variety of different types of lumber.
This garden hut shed is practically growing into the scenery. The hut is sheer nature, as depicted by the garden growing off the roof of the structure. This shed has undoubtedly been in this surrounding for a while, but that does not diminish the function of it. If anything, the charm of this shed surpasses the time this tiny shed has probably spent on this hillside.
Clear plexiglass has been used extensively throughout this shed to provide the level of natural lighting needed to create a private reading shed. Plexiglass is extremely durable and makes the perfect choice for this particular use. Not only does it let in plenty of light, but it will keep out the odd wayward softball. Although plexiglass can be a little on the expensive side, you should find the investment more than worthwhile when you see how long it lasts.
A Place to Grow recycles greenhouses to create she sheds, wine rooms, art studios, and meditation retreats. For a client in Los Osos, California, a shed is used as a sewing room and private escape. When designing studios and hobby sheds, allow room for shelving, storage, and workspace. Naturally, the space will need to be wired for proper lighting.
By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.
Note: Here’s how we can help: 24hplans has team of highly-trained, professional architects and drafters who can prepare any kind of site plan in the shortest amount of time possible, so that you can easily obtain that building permit and get on with your project. Use the promotion code: 24hplans-20off to get a 20% discount off any package. — Please note this is a limited time offer, exclusive to the readers of our blog. This offer is not being advertised anywhere else.
There are several ways to economize when building a shed: Install three-tab roof shingles instead of architectural shingles, or use grooved-plywood siding in place of cedar bevel siding. But don't ever skimp on the building materials used for the floor frame or plywood floor deck. I can't tell you how often I've walked into a shed and found the floor to be dangerously spongy. One building in particular had a floor so badly rotted it felt like one of those inflatable moonwalk attractions you see at carnivals.
This tiny office space is perfect for those times you need to get away and focus on some important work. Whether you are a work-from-home person or an individual that has a freelance side gig, it is always great to have a space that is just for you and getting your work done. Once you have created this space, your mindset will automatically be in work mode every time you enter it.

The shed we built rests on a foundation made up of 12 solid-concrete blocks. The 4 x 8 x 16-in. blocks are arranged in three rows spaced 59 in. apart. These blocks are typically set directly on the ground, but we put down a 4-in. bed of gravel first because our site occasionally receives groundwater. The gravel will keep the soil beneath the shed from eroding or becoming soggy.
The post holes should be about 4 feet apart. Set up batter boards and mason's string to mark these points. The intersections of the string indicate the locations of a post corner. Use the 3-4-5 method described above to check for square at each intersection. Adjust the string along the batter boards as necessary and mark the location of the string on the batter boards.
For a seating area I cut 4 x 18 inch lengths of 3x3 post and I had some 12mm thick wood that I used for the seat but you could use ply board (I recommend 18mm for strength). Simply cut the ply to size then drive a screw through the ply board into the posts. Once made then use corner braces to secure in place to add that extra strength and make sure you test it out before you use it. If you are making a longer seating area then you may need more posts in the middle for support.
If you do not have a lot of bulky gardening equipment, but would still like to protect and store your standard tools, acquiring a smaller shed may be the best bet for you. This convenient space will provide shelter for all the gardening essentials and will help you keep all your tools organized. What a great feeling to know that all your tools are going to be organized within the same space and you do not have to go out and hunt for them all.
I even have a friend whose parents have a bar shed. They don’t call it that, and I never realized it until writing this article, but it’s the size, shape, and build of a standard shed, located near their pool. It houses all of the pool supplies, alongside a nice 4-person bar, a beer fridge, and a sizable selection of liquor. It was right in front of my eyes all this time. I just never really thought of it as a bar shed.
Galvanized steel stanchions, stainless steel wire, and a hardwood cap were used for the railing of this modern shed built by J. C. Stoneman Construction. Located in Port Townsend, Washington, the modern shed features a sliding glass door, clerestory windows, and a pitched roof that overhangs the porch and provides shade. The siding is made of Western red cedar.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
I got in touch with the man behind ReaderSheds, Andrew Wilcox, also known as “Uncle Wilco, Head Sheddie,” and he told me a bit about the rise of this trend in the UK: “When the indoor smoking ban came into force in 2007, I saw a steady increase in the number of pub sheds added to my website,” Uncle Wilco told me. “But for years and years people have always had a quick beer in their sheds on allotments.”
We found all the materials to build this shed at our local home center. Most of the construction is straightforward and requires only standard carpentry tools and a circular saw. For how to build the shed windows and door, you’ll also need a table saw, power miter saw and router. We used a Kreg pocket hole jig and pocket hole screws to assemble the door and windows. With a helper or two, you could have the platform and shell built in two or three days. Then expect to spend four or five more days completing the siding, trim, doors, windows and roofing.
×