Sixty Stores Ltd is authorised and regulated by the Financial Conduct Authority (FRN 0662525) and acts as a credit intermediary. Finance options are provided by Divido Financial Services Limited in association with a panel of lenders who are authorised and regulated by Prudential Regulation Authority and/or Financial Conduct Authority. Finance available subject to age and status. Terms and conditions apply.
If your prehung door has exterior trim, pry it off. The wide trim board running around the shed, under the soffit, will take the place of the top door trim. Place the door in the opening to check the fit. The top doorjamb should rest against the wide trim board. Use wooden or composite shims between the side jambs and the 2×4 framing to square the door frame. Place shims behind each hinge and at the top, middle and bottom of the latch side. Adjust the shims until there’s an even space between the door and the doorjambs on the top and sides. Then drive screws through the doorjambs into the framing at the shim locations to secure the door.
The slanted roof of a modern house in the San Francisco Bay Area is echoed in this small wooden tool shed. Conceived by Astrid Gaiser Garden Design, the shed becomes an interesting part of the landscape design instead of something tucked or hidden in a corner or side yard. Gaiser even added a chalkboard for kids and adults to draw and write messages.

This adorable teak storage shed is perfect to sit on a patio or covered garden area when you need to just store some of the essentials, such as garden shovels, brooms, and rakes. Almost acting as a storage closet, this nifty space definitely does not take up too much space and can almost just blend into the background. This is ideal for a small garden area or even a side garden area that still needs a little bit of storage capability.
Generally, smaller sheds of up to 8×6 do not need a foundation. Small sheds can be rested on crushed stone with either treated wood foundations or concrete foundation blocks. Large sheds will need to have strong foundations. Considering Backyard Buildings smallest shed size is 8×8, all of our sheds will need a foundation setup prior to the arrival of one of our installers.
Additional options include ready-built sheds that are shipped completely assembled. Find out if these will need to be finished, sanded, and painted or stained. Prefab and already-built sheds are an attractive concept, but investigate shipping costs. Consider feasibility and logistically how you'll manage the project. Some sheds are delivered by a truck equipped with a crane. Will the crane be able to drive on your property and deliver the building without tearing down walls or fences or plowing over a lawn or garden?
How about scouring the river for a few days to gather wood for a shed? That may sound like a ridiculous and like one of those cool shed ideas. However, it is cheap, out-of-the-box, and likely a possibility for a unique and very rustic garden centerpiece. It may not be classy but why does it need to be. It is definitely an idea with potential for a different kind of beauty. IDEA: Gather some driftwood and turn it into a rustically beautiful garden shed

And since we started with a simple shed, we’re going to finish in the same tone. This cute garden shed has a very lovely, simple and clear look. It’s made with prefab wall panels and doors and windows that slip into precut openings, making the building process very quick and easy. Then all you have to go id decorate it with hanging baskets and boxes and add beautiful plants.
Using wooden pegs and string, mark out the exact base size required, being careful to measure both diagonals in order to get the area square. The is area can now be excavated to a depth of 3". This depth can vary depending on the thickness of slab used and the gradient of the ground excavated. Overall you're looking to achieve a thickness of 4-5cm of sand/cement mix and the slab on top.
These LED rail lights are the perfect, cost-effective way to light up an outdoor space without lightening the wallet. Whether you need a ton of lights for your next garden shed bar party or just a few to light up your child’s playhouse, these lights are great because all they need to use to work is the actual sunlight. No need to worry about batteries or extension cords when it becomes known! They do all the work for you.

Since it’s made out of plastic, there’s nothing glamorous about this shed’s appearance. Also, if you plan on storing expensive stuff in this shed, you should perhaps think about other options, because this one is a low security shed. Although you can install a hard to break lock, the thief can still cut through the plastic with ease, thus rendering your lock useless.
Once the concrete has cured, set a post on top of the footer. Use the intersection of the mason's string to set the post square. Making sure the post is plumb — and holding it straight — add concrete around the sides and cover with soil. Brace each post to keep it in position while the concrete sets. Watch our video How Do I Set a Post in Concrete? for an illustration of bracing.
Many sheds come with floor bearers already fixed to the underside. These are smaller timber bearers - usually 3 x 2 inches - that run perpendicular to the timbers of your wooden frame. If yours doesn’t, it’s worth adding some (at intervals of 16 to 24 inches) to allow air to circulate and prevent damp. Just fix them to the base before you start building your shed.
For me, heating with firewood is more about feeling self-sufficient than it is about lowering my utility bills. I also like cutting and splitting logs. It's good exercise and the source of my wife's wry nickname for me, the Saturday Lumberjack. But storing and keeping the wood dry is a hassle. Tarps can trap moisture, promote rot, and be difficult to remove after a snowfall. And stacking the wood inside is a poor choice, unless you enjoy the company of insects and mice.
Before beginning to build any foundation for your shed, consult your local building inspector to determine what type of foundation you will need. The decision will be based on the height and size of your storage shed. Regardless of the size of your shed, a building inspector needs to make sure that the storage building is up to code for your local area.
Stand the timber upright on its edge and push and pull it backwards and forwards across the frame while dragging it from one end to the other and this will level it roughly. Next, lift the board at both ends about 4 inches above the frame and tap it back down on the frame, moving up and down the frame as you do so. Try and tap together so both ends of the board hit the frame at the same time.

This backyard shed’s design is a nod to the property’s farmhouse. But beyond its charming shake siding and robin’s egg blue door, the design is practical and savvy. Many of the materials used to build the shed were salvaged from a home renovation. The shed can also be moved, as it is set on concrete piers on gravel and sand instead of a permanent foundation.


This incredible shed has been transformed into a space center! The space shed has a telescope in it perfect for viewing all the stars at night. This would be the best “playhouse” idea for a kid who is really into science, or even for any-aged space geek who would love to take full advantage of this star platform! I, for one, would absolutely love this space and would probably never leave it!
Concrete starts to harden and set about two hours after it has been mixed, so it must be laid, tamped (packed down) and given its finish within that time. Divide large areas into bays or sections which can be completed one at a time before they begin to set. You can walk on the concrete after three days and remove the formwork after five days (but as always, check any product instructions for the mix you are using as there are rapid-setting options available).
The composition and design of our plastic shed base range may seem a little strange at first. Each panel is secular in design with the intention of certain panels being filled to add further support to the shed above. Typically, with other types of shed base, because they’re solid, a layer of air is trapped between the shed base and the bottom of the shed. This can quickly become warm and moist and, if left, could cause a severe damp problem that’ll leave your shed rotting from the base up.
Use dimensions from Figure C (in Additional Information below) to snap lines for the peak. Then cut 2x4s to fit inside the lines and toe-screw them to the plywood to hold them in place while you fill in the center studs (Photo 1) and nail on the siding (Photo 2). Toe-screw from the outside so the screws will be accessible after the siding is installed.
×