I think it might depend on which type of deck blocks you’re talking about. If you’re referencing the deck blocks that you might find at Home Depot, they have one that can be used for 4×4’s. 4×4 fits in the plate. Some of the deck blocks are suited to 2x4s, not the 4×4’s our installers use for the foundations of our sheds. I hope that helps. Have a great day!

It is very critical to have a dry and level foundation. It is impractical to build a shed on an uneven foundation. This will prevent the wall sections (simple diagrams for making shed from scratch) from fitting into place when you try to secure them to each other. For sheds which will need to hold heavy items, it is recommended to build a concrete foundation. The two most common methods of building the shed foundation are as follows.
This backyard barn storage shed is the perfect space to store all the essentials. Doubling as a functional space, this barn is adorable to look at. It adds class to an outdoor area and guests will surely notice this adorable mini barn sitting amid your backyard decorations. If you do not have a very large outdoor area, you can always scale down to suit your needs.
4. Lay out your 4" x 4" skids properly spaced and lined up on your foundation, making sure they are level. Set the floor frame on top of the skids and measure the diagonals to make sure it's square. At this point, toe nail all joists to your skids using 16d common nails. The joists which fall at the 4', 8', and 12' lengths along your skids should be measured before nailing to make sure they are nailed exactly on center at those distances. This way,
We’re using tongue-and-groove LP ProStruct Flooring with SmartFinish for the shed floor. Fasten the first sheet in the back corner with construction adhesive and deck screws. Finish the row with a half sheet. Then start with a full sheet from the opposite end so the seams between sheets are staggered. The photo above shows how we installed the flooring. Learn more in-depth instructions for how to install flooring here.
We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
When thinking about how to make a shed look nice, take a cue from the shed’s surroundings. Set among towering trees and winding stone paths, weathered wood and traditional cottage design elements befit this shed’s forest setting. The steely blue-gray door and shutters suit the design and a glazed finish gives the features a bit of dimension. Board and batten siding offers distinction to the simple form of the garden shed.
The front and back gable ends are covered with panels that resemble cedar shakes. After installing a metal drip cap over the 1×2 that caps the wide trim board, install the shakes according to the manufacturer’s instructions (Photo above). Follow the manufacturer’s instructions for details about panel placement and how much caulk space to leave between the panels and the trim.

Next, frame the floor with 2x6s. Start by cutting the 12-ft.-long rim joists for the front and back and marking the joist locations. Cut the joists and nail them to the rim joists. When you’re done, square the joists (Photo above). Then use a taut string line or sight down the 12-ft. rim joist to make sure it’s straight. Then drive toenails through the joists into the 6x6s to hold the joists in place.
Check with your local building department to see whether a permit is required. Also find out if there are rules about where your pub shed can be located on the lot. Take the Materials List (in the project pdfs below) with you to your favorite lumberyard or home center and go over the list with the salesperson to see what items you may have to order. Then set up a delivery so you’ll be ready to build the pub shed when your help arrives. A few days before you plan to dig, call 811 for instructions on how to locate buried utility lines. Now it’s time to start building your pub shed.
Garden sheds are very common and that’s because of their multiple functionalities. They can be used for storage for all the items you no longer have room for in your house but mostly for garden supplies and tools. Also, they commonly used for hobbies. They’re like a mini-home for all your collection items and memorabilia, like a sanctuary for personal items. Moreover, garden sheds also make great workshop spaces. And since their functionality varies from person to person and from type to type, so does their design.
When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.
×