Stand the timber upright on its edge and push and pull it backwards and forwards across the frame while dragging it from one end to the other and this will level it roughly. Next, lift the board at both ends about 4 inches above the frame and tap it back down on the frame, moving up and down the frame as you do so. Try and tap together so both ends of the board hit the frame at the same time.
Many sheds come with floor bearers already fixed to the underside. These are smaller timber bearers - usually 3 x 2 inches - that run perpendicular to the timbers of your wooden frame. If yours doesn’t, it’s worth adding some (at intervals of 16 to 24 inches) to allow air to circulate and prevent damp. Just fix them to the base before you start building your shed.
I really like the 16 x 16 Aspen and I’m currently installing my foundation and slab with a tentative purchase intent with your company. Our code here is, maximum of 256 sq. ft. shed without a permit. I’ve excavated -2′ around the perimeter and – 6″ for the pad. Right now I’m at that point of decision of concrete footer or not. I can fill my footer area with compacted 30D stone, then level the pad to grade or I could form and pour these footers which will cost a lot more bennies. I plan to frame the 16 x 16 pad for 6″ of concrete and call it a day. A few questions please; Will compacted stone under a concrete pad be sufficient for your shed? Can the shed be built without the floor in the quote if I have the concrete pad? What exact dims should that concrete pad be for your 16×16 Aspen? Thanks for your help, now back to work!
We, at Overholt & Sons, have done some research to gather some of the best garden shed photos out there. From our hours of looking, we have compiled a list of 30 exceptional and interesting photos. We set them apart, not as the only ideas and photos, but as some of the best. We intended to set these 30 photos apart from the rest of the noise for your inspiration, enjoyment, and enrichment.
This is one of the bigger (and more costly) DIYs I’ve ever wanted to do, so I’m going to have some first-time learning curves ahead. Also, obviously, it’s something I’ve had to save up for. If you’ve noticed the increase in my sponsored projects on the site over the last few months, this is one of the main reasons I’ve taken them on (the summer is usually when I wind up working with more sponsors, so I wanted to funnel some of that to immediately start planning for this!). I’ve already seen what the kinds of costs are to have one custom built by ordering, so I’m hoping the DIY is also going to be more budget-friendly.
Stand the back wall. Then align the corner of the side and back walls and nail them together. With a helper on the outside of the shed to push if necessary, line up the inside edge of the bottom plate with the chalk line and nail it to the platform. Continue around the building, standing the opposite end wall and finally the front wall. Nail the corners together, making sure that the top plates of adjoining walls are flush with each other.
These storage sheds are straight off the farm. I almost expect to see a lazy cow grazing in the far backfield or a group of chickens pecking at the ground. If your goal is to create a classic farm space, using these storage sheds is a sure-fire way to do so. Again, these sheds are not only functional, but they are adorable to look at and will definitely be an interesting conversation piece to guests.
This wood shed plan keeps wood open and dry and easy to access. This sort of open firewood shed is good if you live in a place where it stays fairly dry in the winter. If you have a lot of snow, it might be an issue. But overall, this simple, sturdy design of a storage shed plan is a great start. You can easily store a full cord or more in this size of shed.

This whole backyard space seems well put together thanks to the matching wood elements and complementing plant life. This is a great way to incorporate a storage shed into the garden space that does not stick out or look like an actual storage shed. In this case, the storage shed is only made more beautiful by all these complementing elements that work in conjunction.
Of all the different simple shed designs, this one uses simple stacked lumber siding in which each length of board is laid edge on to the one below it and nailed in place. While this design can be quite strong, unless you seal the gaps between each board with some form of caulking, it might let the rains come in. Once your little girl grows out of it, you can turn it into a dog house, or add plexiglass windows and a door to turn it into a storage shed.

The roof panels are heavy and a bit awkward, so round up three strong helpers for this part of the job. Move the panels into position and lean them against the front and back walls. Then set up ladders inside the building for two helpers and push one of the panels up to them. Slide the panel up the roof until the bird’s-mouths drop over the top plate of the wall.
This cottage potting shed takes design cues from the main house, using the same earthy green and white paint colors. Extras like a deck, stone path, and cottage-style mixed planting borders make the backyard shed design feel more like a home than just an outbuilding. Several garden shed decorating ideas, like lace curtains in the windows, a quaint bench, and outdoor art also add homey appeal. In a practical move, downspouts ensure rain doesn’t damage the plants that surround the building.
Connect three windows to form the window assembly for the side wall (Figures R and U). Use a pair of 2x4s as spacers between each window. Screw through the window frames into the spacers to hold the windows together. Tip the triple window assembly into the window opening. Shim under the windows until about 3/8 in. of the top frame is exposed on the outside. Shim between the studs and the window frame to level and plumb the window unit and to adjust the frame until there’s a consistent space between the window frame and the sash. Make sure the window frames are flush to the siding. Then screw through the window frames into the studs to hold the windows in place. We added Stanley Storm Window Adjuster hardware to the windows to hold them open and to lock them.
Since this is going to be a much bigger project, it will be isolated as its own series (look for “Pub Shed” as the category on posts for updates). As you guys might have seen in some of my Instagram shares or updates about the back yard, I’ve already begun the process to try to make it into a reality. More specific details (now that I’ve actually announced the first round of plans with this post) will be upcoming, including building the base (it’s not fully “in” yet, so that will have its own post when it is).

This backyard barn storage shed is the perfect space to store all the essentials. Doubling as a functional space, this barn is adorable to look at. It adds class to an outdoor area and guests will surely notice this adorable mini barn sitting amid your backyard decorations. If you do not have a very large outdoor area, you can always scale down to suit your needs.


Concrete starts to harden and set about two hours after it has been mixed, so it must be laid, tamped (packed down) and given its finish within that time. Divide large areas into bays or sections which can be completed one at a time before they begin to set. You can walk on the concrete after three days and remove the formwork after five days (but as always, check any product instructions for the mix you are using as there are rapid-setting options available).

This shed is so gorgeous it looks like some kind of fancy greenhouse. Technically, you probably could turn this shed into a greenhouse, although its primary purpose is to store things. It doesn’t really matter, though, when you have a shed that is this lovely. You could turn it into anything you want, and because of its beauty, you may want to just transform it into a recreational hall!
Pasadena, California, is known for its Craftsman style homes, a great number of which have been carefully preserved and restored. Owned by a University of Southern California (USC)-educated architect, Nott & Associates specializes in the Craftsman style. For a backyard shed, Nott custom designed and constructed the wooden doors, which include period-perfect details and hardware.
This year’s pub shed is one of the most versatile we’ve ever built. The bar and covered patio area make it a perfect place to entertain or just hang out. The steep roof and sturdy lofts provide tons of extra storage space. And the high-tech materials, including reflective roof sheathing and prefinished floor panels, add to the shed’s comfort and convenience. Of course, if you don’t want a bar, you can install a bank of windows in its place. In fact, without too much more work, you could eliminate the front porch and build one big shed for even more storage space
And since we started with a simple shed, we’re going to finish in the same tone. This cute garden shed has a very lovely, simple and clear look. It’s made with prefab wall panels and doors and windows that slip into precut openings, making the building process very quick and easy. Then all you have to go id decorate it with hanging baskets and boxes and add beautiful plants.

This worked awesome. Build a 8x12ft greenhouse using these brackets. Be careful, the brackets are as sharp as a razor and will cut very easily, but it worked really well. Buy two, and 12ft 2x4s and 8fter's work great. Buy a deadblow hammer cause it takes a little persuasion since wood is never perfectly straight, but once you get the gist of it, you're on your way.


Of all the different simple shed designs, this one uses simple stacked lumber siding in which each length of board is laid edge on to the one below it and nailed in place. While this design can be quite strong, unless you seal the gaps between each board with some form of caulking, it might let the rains come in. Once your little girl grows out of it, you can turn it into a dog house, or add plexiglass windows and a door to turn it into a storage shed.
Do not purchase materials or attempt to build this shed project unless you have studied the information provided thoroughly, and have verified all dimensions and material requirements for yourself. Also verify that the plans conform to local building codes and practices. Although every effort has been made to ensure the accuracy of the information and design, the user is ultimately responsible for the use of this information. All information provided is copyrighted and cannot be duplicated without the permission of Shedking. 
Figure A (above) and Figure E (in Additional Information below) show how to build a shed and the exterior trim details. Start by mounting the brackets. Line up the outside edges of the lower brackets with the face of the siding, push them tight to the soffit and screw them to the wall. Center the top bracket on the peak and push it tight to the soffit. Starting with the pieces that go under the brackets, wrap the corners with the corner board. Overlap the front corner board onto the side corner board (Figure E, in Additional Information below).
This shed is so gorgeous it looks like some kind of fancy greenhouse. Technically, you probably could turn this shed into a greenhouse, although its primary purpose is to store things. It doesn’t really matter, though, when you have a shed that is this lovely. You could turn it into anything you want, and because of its beauty, you may want to just transform it into a recreational hall!
Outdoor wall lanterns are the perfect lighting elements for an outdoor shed. Especially if the shed is turned into a working or relaxing space, these lanterns only add intrigue to the whole area. From bar sheds to a child’s play space, proper lighting is important when it comes to lighting up your refurbished garden shed. With outdoor lanterns like these, it is easy to create an illuminated space easy to rest your eyes on.
People are often a little dubious about the capabilities of our plastic shed bases, just because they’re plastic. However, they’re stronger than the majority of other bases available and are certainly a whole lot better looking. These base panels can withstand weights of up to 420 tonnes, meaning not only can they take the weight of a shed that’s filled with everything from garden furniture to bikes and barbecues, they can also withstand the weight of a HGV and pretty much anything else you throw at it!
Most homeowners barely have enough time to keep their homes in shape, never mind their sheds. Heck, I was supposed to paint our downstairs bathroom before the kids got out of school last month. I just picked up the paint yesterday. That's why it's smart to choose low-maintenance materials for your shed. You usually need to pay a bit extra for these, but they'll save you time and trouble in the long run.
It's important to accurately place the footings, or piers—it makes the build quicker and easier by preventing constant remeasuring and adjustment. We set the four corner piers in rough position and brought them into alignment with a string line. Then we used a tape measure to check the diagonals of this rectangle and to position the fifth and sixth piers relative to the perimeter.
This whimsical garden shed looks like something you would see in a “Lord of the Rings” movie. With its almost twisting structure sitting in the middle of this forest landscape, I am almost surprised I do not see a tiny Hobbit poking about with a pipe in hand. It is a truly gorgeous setup and this just goes to show how versatile these garden sheds can be.

Complete the siding, then remove the toe-screws and move the wall aside to make room for constructing the opposite wall. Use the same chalk line template and process to build the opposite end wall. Figure C (in Additional Information below) shows framing details for the front wall. Mark the curves on the 2×10 header pieces using the trammel setup shown in Photo 12 and Figure G (in Additional Information below). Cut them with a jigsaw. When you’re done building the front and back walls, set them aside so you can use the platform to build the roof sections.

×