There are a few styles of pier blocks available, including one that has a square hole molded into the top through which a vertical 4×4 post can be inserted. Another type has a flat wood block set into the top so you can toenail a joist in place. For building shed foundations, I prefer to use Dek-Block piers. Each block measures 8 in. high by 11 in. sq. and weighs about 45 lbs. Molded into the top surface are a 3 1/2-in.-sq. recessed socket and a pair of 1 1/2-in.-wide slots. The socket accepts a 4×4 post; the slots are used to support a 2x floor joist. Because Dek-Block piers can accept either a joist or a post, they can be used on very uneven sites and badly sloping terrain.
Award Winning Designer, Candace Osmond has been in the industry for over a decade. She studied Interior Decorating & Design and is also an accomplished writer and multi-published author. When she's not typing away from the comforts of her desk, Candace can be found travelling to warm destinations, tending to her garden, or enjoying the outdoor haven that is her backyard. Candace currently resides in the breathtaking Maritimes of Eastern Canada with her husband, two beautiful kids and one slobbery bulldog.

I got in touch with the man behind ReaderSheds, Andrew Wilcox, also known as “Uncle Wilco, Head Sheddie,” and he told me a bit about the rise of this trend in the UK: “When the indoor smoking ban came into force in 2007, I saw a steady increase in the number of pub sheds added to my website,” Uncle Wilco told me. “But for years and years people have always had a quick beer in their sheds on allotments.”
The roof panels are heavy and a bit awkward, so round up three strong helpers for this part of the job. Move the panels into position and lean them against the front and back walls. Then set up ladders inside the building for two helpers and push one of the panels up to them. Slide the panel up the roof until the bird’s-mouths drop over the top plate of the wall.
It's a work in progress and likely a labor of love for Rob, aka Weekend Shed Head, who chronicles the construction of his backyard man cave in Nottingham, England, on his Instagram account and YouTube channel. An experienced and enthusiastic do-it-yourselfer, he sort of makes things up as he goes along and seems to know what he's doing. Along the way, Rob posts photos of train stations, the curry dinners and full English breakfasts he cooks, and charming flowers and decor in the garden.

If you’re wondering how to make a garden shed look nice, add a little vintage character. Salvaged windows and barn-board siding give this garden shed visual appeal. Thoughtful details, like the window trim on the exterior and the cupola perched on the roof, transform what could be a basic storage shed into an inspiring garden-side retreat. And don’t be afraid of a little color, either. Because sheds are smaller, a bright and bold color will simply pop, rather than overtake, like it would on a larger house or garage.
the biggest problem I had was that the instructions I downloaded from the manufactures web site had a different cut list than the documents that came with the kits. I had already cut the lumber based on the downloaded list so I was dismayed to find that two of the lengths specified in the packaging were longer than the ones I cut from the downloaded plans. I did try assembling an arch with both specs, but nether of the lengths resulted in an arch that actually matched the frame. I wound up forcing things to fit and got the framing up, but it was much harder than it looked and you need at least three people to put it all together.
Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.
The plastic pro base is a lightweight and eco-friendly alternative to a concrete base. It is simply to install, simply level the ground and lay down the weed proof membrane and connect the grids together. The pro base comes as a kit featuring individual tiles, which fit together to make a base. The kit also features a permeable membrane, which allows water to drain away while preventing weeds from growing through.

If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
The amount of rainfall the UK is subjected to each year means that the ground is constantly trying to dry out. When a shed is placed directly onto grass or soil, as some people like to do, when it rains and ground becomes sodden, the shed (or anything heavy for that matter) will start to sink into the ground. This sinking is rarely even, as very often some areas of ground are considerably stronger, or more compacted, than others. This means that as soon as the shed starts to sink, it becomes uneven and, overtime, is left under immense pressure because of this strain.
The shed we built rests on a foundation made up of 12 solid-concrete blocks. The 4 x 8 x 16-in. blocks are arranged in three rows spaced 59 in. apart. These blocks are typically set directly on the ground, but we put down a 4-in. bed of gravel first because our site occasionally receives groundwater. The gravel will keep the soil beneath the shed from eroding or becoming soggy.
And since we started with a simple shed, we’re going to finish in the same tone. This cute garden shed has a very lovely, simple and clear look. It’s made with prefab wall panels and doors and windows that slip into precut openings, making the building process very quick and easy. Then all you have to go id decorate it with hanging baskets and boxes and add beautiful plants.
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.
×