If you're like most people, your shed is probably a little hut in your backyard that you don't think about much—a tiny eyesore filled with rusty tools, boxes full of junk and other knick knacks.  Which is why we're loving that home owners are starting to repurpose these forgotten storage spaces into something awesome: tiny bars located in their very own backyard.
Building a 12×20 shed. Thinking about using 2×8 floor joints and rim board with the joists setting on 6×6 pt timbers tucked under the long 20′ sides with a 20′ 4×6 running parallel in the center. There would be support blocks at the 4 corners and in the center of the 12′ width. Then also in the middle of the three 20′ runs. Total of 9 support blocks altogether with them setting on gravel base ground. Does this sound like a good plan to you?

After crosscutting the steel roof panels, we fastened them to the skip sheathing using self-tapping screws with a rubber gasket under the head. We drove the screws with an 18-volt drill and a socket wrench attachment, but we'd advise using a more sturdy nut driver because penetrating the roofing requires a fair amount of force. Finally, we screwed the diagonal braces to the posts.
Hendy Michelle from the website Vkool.com says, “Ryan Shed Plans is really a useful guide for woodworkers who really want to start a woodworking business. The e-guide includes many useful techniques to build a lounge chair and outdoor fireplaces. Additionally, the system also supplies blueprints, schematics and intricate illustrations of different shed plans. In other words, when ordering this program, people will have 60 days to decide if they want to keep the Ryan Shed Plans program or get their money back.”
A concrete base is the most common type of base for garden buildings and are relatively easy to build, but most people will hire a reputable builder to install the base. A concrete base must be installed in advance of receiving you garden building, this ensures the base has properly set before the building is installed. If the base has not properly set a build up of condensation can form within your new garden building.
This is an adorable way to incorporate a garden shed into your backyard space while maintaining that rustic charm. Utilizing a log cabin garden shed is not only purposeful, but it is super cute, too. The shed can be used to store all of your garden tools and essentials, but looks so cute on its own; it could absolutely act as a standalone, as well. The natural wood color of this shed also adds to that rustic charm.

Many sheds come with floor bearers already fixed to the underside. These are smaller timber bearers - usually 3 x 2 inches - that run perpendicular to the timbers of your wooden frame. If yours doesn’t, it’s worth adding some (at intervals of 16 to 24 inches) to allow air to circulate and prevent damp. Just fix them to the base before you start building your shed.

I really like the 16 x 16 Aspen and I’m currently installing my foundation and slab with a tentative purchase intent with your company. Our code here is, maximum of 256 sq. ft. shed without a permit. I’ve excavated -2′ around the perimeter and – 6″ for the pad. Right now I’m at that point of decision of concrete footer or not. I can fill my footer area with compacted 30D stone, then level the pad to grade or I could form and pour these footers which will cost a lot more bennies. I plan to frame the 16 x 16 pad for 6″ of concrete and call it a day. A few questions please; Will compacted stone under a concrete pad be sufficient for your shed? Can the shed be built without the floor in the quote if I have the concrete pad? What exact dims should that concrete pad be for your 16×16 Aspen? Thanks for your help, now back to work!
If your prehung door has exterior trim, pry it off. The wide trim board running around the shed, under the soffit, will take the place of the top door trim. Place the door in the opening to check the fit. The top doorjamb should rest against the wide trim board. Use wooden or composite shims between the side jambs and the 2×4 framing to square the door frame. Place shims behind each hinge and at the top, middle and bottom of the latch side. Adjust the shims until there’s an even space between the door and the doorjambs on the top and sides. Then drive screws through the doorjambs into the framing at the shim locations to secure the door.

Stand the back wall. Then align the corner of the side and back walls and nail them together. With a helper on the outside of the shed to push if necessary, line up the inside edge of the bottom plate with the chalk line and nail it to the platform. Continue around the building, standing the opposite end wall and finally the front wall. Nail the corners together, making sure that the top plates of adjoining walls are flush with each other.
Concrete requires 3” (7.5 cm) of compacted hardcore (all-in ballast or other crushed rubble/gravel) underneath the 3″ concrete layer. The base can be level with the ground or raised above it. If you want it to be level, excavate the top earth to 6” (15 cm), to allow for the hardcore layer and 3” (7.5 cm) of concrete. Level the area with a rake and spade and remove the pegs.
If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
Thank you for visiting our blog. Yes, the 16×16 Aspen is a great choice as it offers lots of storage space and overall value. We would recommend footers that are slightly smaller than your typical one car garage. Considering ground movement, you definitely want that slab on a solid foundation to keep from cracking. Yes, the concrete pad can act as a floor with no wood floor needed, the bottom plate has to be a treated material. You’ll want anchor bolts placed in the concrete to place the treated plate to hold the shed to the concrete floor. THe shed is a true 16’x16′, so 192”x192″ are the dimensions. Great questions. Feel free to give us a call at 855.853.8558 if you have any other questions!

As I mentioned before, fully stocking a bar isn’t going to be something most people can afford to do all in one fell swoop. Don’t put too much pressure on yourself to fill it up immediately. Buy your favorite liquors, some wine and keep some beer in the fridge. Add to it each month when you have extra cash on hand. But if you want to get it up to snuff, don’t take out a loan. Here are a few creative ways to stock your liquor cabinet in a hurry.
I really like the 16 x 16 Aspen and I’m currently installing my foundation and slab with a tentative purchase intent with your company. Our code here is, maximum of 256 sq. ft. shed without a permit. I’ve excavated -2′ around the perimeter and – 6″ for the pad. Right now I’m at that point of decision of concrete footer or not. I can fill my footer area with compacted 30D stone, then level the pad to grade or I could form and pour these footers which will cost a lot more bennies. I plan to frame the 16 x 16 pad for 6″ of concrete and call it a day. A few questions please; Will compacted stone under a concrete pad be sufficient for your shed? Can the shed be built without the floor in the quote if I have the concrete pad? What exact dims should that concrete pad be for your 16×16 Aspen? Thanks for your help, now back to work!

These garden shed ideas are here to help you on your journey. Whether you wanted something classy or something rustic or even a combo of both, these ideas were meant to inspire ideas. Or whether you wanted something nature-friendly, something artsy, or even to use old materials, these ideas were offered to think outside of the box. To use these ideas, you can either build you own shed from scratch or you can have us build the shell and then deocarate it to your likings.
Excellent submit. My partner and i discover something new as well as challenging on websites My partner and i stumbleupon each day. Most commonly it is beneficial to look over content off their writers and rehearse anything at all from their web sites. You will be therefore magnificent! My partner and i don’t believe I have got study something like this previous to. Flexible to uncover another person with many legitimate ideas on this matter. Seriously.. thank you for commencing the following upward. This website is one thing that’s required on-line, a person with many uniqueness!
Thank you for visiting our blog. When we install we put them on 4×4 treated runners. You can put pavers under the runners if you choose. For more information on leveling and installing with the runners and pavers, please visit this link . As far as the gravel goes that is your preference on whether to put them down or not. Sounds like you have a good foundation! Feel free to give us a call if you have any other questions.
This free shed plan is designed to match the facade of your home and built to add value and appeal is a great long-term investment and a smart build. In one weekend you can have a perfectly suited diy wood shed that looks amazing and works great to keep wood dry, and keeps wood easily accessible. You can trim this woodshed in the same exterior material that your home has and roof it with the same shingles. This shed plan will keep the vermin out and your wood stash in great condition. Good overall firewood storage shed plan!
This garden shed takes its name very seriously. It’s placed in the middle of the garden and stands out with its cute white design. It’s a lovely addition to the landscape and it’s very functional as well. It’s great for storing all the garden tools and it also serves as a comfortable work space and a lovely area for relaxation and for entertaining friends.
Make a template on the shed floor for assembling the trusses. Begin by laying out the parts for one truss. Align the bottom chord with the edge of the plywood floor. Then cut four 24-in.-long 2 x 4s. Lay two alongside each rafter and screw them to the plywood floor. Now use these short boards as stopblocks for laying out and assembling each truss. Fasten plywood gussets to each side of every truss with carpenter's glue and 1-in. roofing nails and set the trusses aside.
I am considering purchasing a 16×24 Everest Tall Barn and using it as a workshop/additional living space to include a full bathroom. For this reason, I am planning to run utilities to the building including natural gas, water, sewer, etc. Since there is no way of knowing where the floor joists will be, there is no way to know where to locate the sewer line for proper flow (connection location) through a concrete slab. Therefore, I was hoping to have a standard footer with craw space installed and attached the Everest on top of it (just like a house). This way I could access the utilities by removing sections of the floor so I could run the sewer line (and other utilities) to exact areas of the building. Is it possible to have the building constructed/attached on top of this type of footer system?
Plastic shed bases are available in various colors. We sell white, black and green so the base can be as obvious, or as inconspicuous as you like. As it’s advisable that the shed’s base is larger than the floor of the shed, you can even create a decorative boarder using the pavers, filling each with either soil and grass seed, gravel or bark – other fillings can also be used but these are by far the most popular.
Start by cutting the 2×8 ridge board to length and marking the rafter locations on both sides using Figure K as a guide. Also mark the rafter locations on the floor along both sides of the shed. Next, set the ridge on temporary 2×4 posts and brace it with diagonal 2x4s (Photo above). The top of the ridge should be 76 in. from the floor. Cut a pair of rafters (Figure J) and set them in place to test the fit. Make any needed adjustments, and when you have a pair of rafters that fit perfectly, mark one of them as a pattern. Use the pattern to trace the rafter cuts on the remaining 2x6s and cut out the rafters.
We’re using tongue-and-groove LP ProStruct Flooring with SmartFinish for the shed floor. Fasten the first sheet in the back corner with construction adhesive and deck screws. Finish the row with a half sheet. Then start with a full sheet from the opposite end so the seams between sheets are staggered. The photo above shows how we installed the flooring. Learn more in-depth instructions for how to install flooring here.
Using wooden pegs and string, mark out the desired base size adding 2" to each length, for example: for an 8x6 base you would need to string mark 8'2"x6'2". Measure from corner to corner to ensure the area marked out is square. The concrete base cna be level with the surrounding soil or raised above. If you require a level with the ground base you need to excavate the area to a depth of around 6" to allow for 3" of hardcore/sub-base and 3" of concrete. Level the area with a rake and remove the pegs and string. 
A shed-like companion residence was built adjacent to the existing house on this property in Austin, Texas. Designed and constructed by Moontower, the structure features exposed plywood, blackened steel, clear sealed cedar and pine, exposed structural elements, and utilitarian lighting fixtures. A balcony gives the building a treehouse feel and offers views of the Austin skyline and a nearby college bell tower.

I'm always surprised at how little forethought most backyard builders give to the shed's doors. After all, there's no sense in building a shed to store a particular item, such as a lawn tractor or wheelbarrow, if you can't fit it through the door. I saw a shed recently that had its doors removed. When I asked why, the homeowner explained that he framed the doorway wide enough for his riding lawnmower, but didn't take into account the amount of space taken up by the hinged inset doors. So, he had to remove the doors to fit the mower inside. (He's in the market for a skinnier mower.)


The fact that they’re lightweight also makes them really quick and simple to install. Each panel features an interlocking mechanism on each side which attaches in seconds to the other panels. Most people can expect to lay around 100 m2 of these plastic pavers in just an hour, so there’s no need for building your shed base to take up your entire day.
If you're like most people, your shed is probably a little hut in your backyard that you don't think about much—a tiny eyesore filled with rusty tools, boxes full of junk and other knick knacks.  Which is why we're loving that home owners are starting to repurpose these forgotten storage spaces into something awesome: tiny bars located in their very own backyard.
Modifications can be made to these plans if need be such added doors, windows, building dimensions, etc. Stud spacing, floor joist spacing, and roof joisting spacing is 16" on center, Materials can be changes as well such as wall, roof, and paint coverings. If you wish to print these plans, they can be printed to scale on 8x11 paper. A full pdf files is available on my website, along with other shed plans too. Building Plans Here
This shed studio is the perfect place for relaxing, getting some work done, or even living in! Tiny homes are all the rage these days, and what better way to construct a tiny home than utilizing a refurbished garden shed. Not only is the space so cost-effective, but it can really be a great little space if you know how to work with the area well. It could turn out to be a fun project!
Just because you are using a garden shed, it does not mean that you cannot fancy it up! This gorgeous garden shed is the essence of luxury. The purple flowers just pop against that alabaster fence and shed. This is an adorable coffee area and definitely, a place you could sit and feel comfortable having some morning conversation in. The foliage in this scene definitely adds more class to the décor.
We, at Overholt & Sons, have done some research to gather some of the best garden shed photos out there. From our hours of looking, we have compiled a list of 30 exceptional and interesting photos. We set them apart, not as the only ideas and photos, but as some of the best. We intended to set these 30 photos apart from the rest of the noise for your inspiration, enjoyment, and enrichment.
I got in touch with the man behind ReaderSheds, Andrew Wilcox, also known as “Uncle Wilco, Head Sheddie,” and he told me a bit about the rise of this trend in the UK: “When the indoor smoking ban came into force in 2007, I saw a steady increase in the number of pub sheds added to my website,” Uncle Wilco told me. “But for years and years people have always had a quick beer in their sheds on allotments.”
Factor in size, because a really small shed probably won't be ideal for a bar. Think about how many people you plan to host on a regular basis, as well as your ideal seating (stools take up less room than a booth). Keep in mind that your local building department might have a size restriction on backyard sheds built without a permit. Around 120 square feet is usually a safe bet.
Since this is going to be a much bigger project, it will be isolated as its own series (look for “Pub Shed” as the category on posts for updates). As you guys might have seen in some of my Instagram shares or updates about the back yard, I’ve already begun the process to try to make it into a reality. More specific details (now that I’ve actually announced the first round of plans with this post) will be upcoming, including building the base (it’s not fully “in” yet, so that will have its own post when it is).
We found all the materials to build this shed at our local home center. Most of the construction is straightforward and requires only standard carpentry tools and a circular saw. For how to build the shed windows and door, you’ll also need a table saw, power miter saw and router. We used a Kreg pocket hole jig and pocket hole screws to assemble the door and windows. With a helper or two, you could have the platform and shell built in two or three days. Then expect to spend four or five more days completing the siding, trim, doors, windows and roofing.
×