My name is Farhan Ahsan,I am web enthusiast, writer and blogger. I always strive to be passionate about my work. I started my work at the beginning of 2007 by engaging myself with detail reading and exchanging information with others. Since then things and times have changed, but one thing remains the same and that is my passion for helping and educating people, building a successful blog and delivering quality content to the readers. I always love to write about gardening, sustainable life, off grid living and homestead farming.
Ordering a prehung wood door like this from the lumberyard could cost as much as $1,000, but you can build one suitable for a shed at a fraction of the cost. We purchased clear pine at a home center and spent $120 for the boards. Photos 8 – 10 show how to build the door and mount it to a trim piece with hinges. The door consists of two layers of 3/4-in.-thick boards that overlap at the corners to add strength. Rip 1×6 boards to 4-1/2 in. on a table saw for the outside layer (Figure F, Additional Information below).
This tiny red barn is so charming; you may find yourself just wanting to live in it! It looks like it could be a perfect tiny apartment or home. The outside of it is adorable, so if there is just power tools and garden tools inside, they are very lucky to have such a cute home! This is a great shed because it is small enough to remain out of sight but cute enough to want to put it in the limelight.
1. Choose a location. You may have already completed this step but it’s good to put some thought into the location of your outdoor storage building. Check with your local township to make sure you follow setback guidelines. If installing next to a fence it’s a good idea to allow enough room between the shed and fence so that a person can squeeze through. Make sure the location can be accessed by your shed builder’s delivery equipment.

This wooden shed may be simple, but it is within the simplicity of the structure that the true beauty is a draw. This would make the perfect playhouse for children or even a getaway space to go have some coffee in and read a book in. It is an adorable space that could be used for so many different things. The possibilities are endless when it comes to shedding like these.


Use dimensions from Figure C (in Additional Information below) to snap lines for the peak. Then cut 2x4s to fit inside the lines and toe-screw them to the plywood to hold them in place while you fill in the center studs (Photo 1) and nail on the siding (Photo 2). Toe-screw from the outside so the screws will be accessible after the siding is installed.
Are you against the idea of a treehouse because you fear for your kids’ safety? Then, here’s the solution. If you don’t want them to hate you ever since their childhood (they’ll have plenty of occasions later on), you’ll buy a nice shed and you will paint it to turn the construction into a beautiful playhouse for your children. The shed in this photo was actually turned into a playhouse for 2 little girls.
There are two 4×4 posts at the front of the shed that support the front half of the roof. Secure the bottom of the posts to the deck frame with metal post anchors. Tie the top of the posts together with the second (top) 2×4 plates that run over the top of the walls. Miter the ends of the 2×4 plates over the posts and attach them with screws (Photo above).
The new home and garden trend is sweeping the internet, and it's actually pretty amazing and doable. We've seen she-sheds, but this puts a different spin on making the most out of your shed. DIY bar sheds are popping up all over the place, and some of them are pretty darn creative. With a wide array of different options, this is one of the least daunting DIY home projects we've come across in a while.

And since we started with a simple shed, we’re going to finish in the same tone. This cute garden shed has a very lovely, simple and clear look. It’s made with prefab wall panels and doors and windows that slip into precut openings, making the building process very quick and easy. Then all you have to go id decorate it with hanging baskets and boxes and add beautiful plants.
The female version of man caves are she sheds: havens to escape that can be designed and decorated in whatever style the owner desires. Inspired by a tiny hummingbird viewed nearby, this shed is aptly named Hummingbird Cottage. Lovely photos on Instagram reveal that the shed is used for art projects, as a retreat, displaying vintage pottery, and for entertaining friends. Extras like a hanging faux-crystal chandelier, potted flowering plants, wreaths, and stained glass give it a personal touch.
While every effort has been made to ensure the accuracy & effectiveness of the information displayed on this website, The Ugly Duckling House is for entertainment purposes only. All tutorials and demonstrations are not intended to be professional advice (nor substitute as such), and I make no guarantees as to the procedures and information here. Creating with my suggested methods, materials, and tools is under your own risk. Please ensure you are following proper guidelines with anything used, and seek professional advice if you don't know how to do something! Read my complete disclosure here.
I’ve been looking at building a tiny house out of (2) 12×16 barn sheds I want to have the sheds install on top of a 2′ concrete foundation wall to allow a second story loft. I’m not sure if I need footings they will be at right angles to each other separated at the corners by 3 to 4 feet I could send you a floor plan of my design and see what you think
There are two 4×4 posts at the front of the shed that support the front half of the roof. Secure the bottom of the posts to the deck frame with metal post anchors. Tie the top of the posts together with the second (top) 2×4 plates that run over the top of the walls. Miter the ends of the 2×4 plates over the posts and attach them with screws (Photo above).
So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
The shed we built rests on a foundation made up of 12 solid-concrete blocks. The 4 x 8 x 16-in. blocks are arranged in three rows spaced 59 in. apart. These blocks are typically set directly on the ground, but we put down a 4-in. bed of gravel first because our site occasionally receives groundwater. The gravel will keep the soil beneath the shed from eroding or becoming soggy.
When it comes to building a shed on a budget, one of the best ways to save money is by using reclaimed or recycled wood for every part of it you can. Depending on where you live, (at least in my area) there are always old homes being torn down. Most of this wood is still perfectly usable and is more affordable than buying new. Not only this, but you are doing your part to reduce the number of trees being cut down.
Have a particularly small outdoor garden area yet want to safely secure tools? Not a problem! Garden sheds and virtually come in all shapes and sizes. Deepening on the size of your particular garden, you may just need a smaller space to store important stuff in. In this garden shed idea, space is small enough to be intrusive into a yard space but effective enough to get the storage job done.
Step # one: Decide exactly where you can placement your garden get rid of in the the best possible location, allow adequate length from shrubs or fencing for convenient accessibility to every facet. Use pegs and wire to attract out your basis, ensuring it is its 2 inches (five centimetres) greater than your garden drop. Lastly, determine diagonals to guarantee the region is square.

The plans showed up stapled together, with floor plans, an isometric drawing, and then half of the instructions are for the concrete pad/anchors, with alternative designs for people in wetter locales. Finally there are some pages of general materials advice. It's really a great deal, when some garage plans are 200 bucks. Those, I believe, are a bit more detailed, but then this structure is not meant to be a crazy engineering undertaking. The plans are worth the 30 dollars.
This worked awesome. Build a 8x12ft greenhouse using these brackets. Be careful, the brackets are as sharp as a razor and will cut very easily, but it worked really well. Buy two, and 12ft 2x4s and 8fter's work great. Buy a deadblow hammer cause it takes a little persuasion since wood is never perfectly straight, but once you get the gist of it, you're on your way.
Since this is going to be a much bigger project, it will be isolated as its own series (look for “Pub Shed” as the category on posts for updates). As you guys might have seen in some of my Instagram shares or updates about the back yard, I’ve already begun the process to try to make it into a reality. More specific details (now that I’ve actually announced the first round of plans with this post) will be upcoming, including building the base (it’s not fully “in” yet, so that will have its own post when it is).
Factor in size, because a really small shed probably won't be ideal for a bar. Think about how many people you plan to host on a regular basis, as well as your ideal seating (stools take up less room than a booth). Keep in mind that your local building department might have a size restriction on backyard sheds built without a permit. Around 120 square feet is usually a safe bet.
If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
×