We built inexpensive windows for the shed using plastic barn sash mounted in 1×4 pine frames (Photo above and Figure Q and R). Start by measuring the sash and building a 1×4 frame that’s 1/4 in. wider and taller than the sash. Cut 10-degree angles on the bottom of the sides to provide a sloping sill. Cut 1×2 stops to fit in the frame and position them to hold the sash flush with the outside edge of the 1×4 frame. Then attach galvanized screen door hinges to the frame, set the sash in place and drill holes for the fasteners. Since the plastic isn’t strong enough to hold wood screws, we drilled holes through the sash and attached the hinges with machine screws, washers and nuts.
Our company has been established in the outdoor building and leisure products industry since 2000. Manufacturing and delivering all our buildings from our UK site, our talented engineers are always striving to develop and improve our buildings. Our blog is full of gardening tips and tricks, as well as interior ideas, news on the latest exciting events and DIY know-how.
The next step after installing deck boards on the front porch is to build the attic floor. The 2×8 joists covered with sheets of flooring material provide storage space in the attic. We left a 4-ft.-wide opening for easy access to the front and back loft areas, but you could also cover the entire area with a floor and provide an access door or pull-down ladder instead.

We are preparing to put together our new 8X6 Resign shed on our concrete slab on the side of the house. The problem we are having is that the slab dips lower towards the center for drainage. How do we go about creating a level foundation? What type of foundation would be best and or easiest? This will be both our first times doing a project like this. Any suggestions will help.
Why buy a greenhouse if you can make it yourself? Especially if it is much cheaper? A cool shed like this can be done very cheaply. The main materials needed are old replacement windows, an old door, a few pieces of wood for rafters, and some polycarbonate roofing sheets. IDEA: Rather than throwing away your old windows, door, and other materials, turn them into a greenhouse shed.
If you don’t already have a garden shed, but wish you did, take a look at the sheds shown here. Whether you want a simple utilitarian structure for storing tools and equipment, a workspace for potting, a playhouse for kids, a fanciful focal point for outdoor living, or something in between, you’re sure to find inspiration in these photos posted by members of our sibling site FineHomebuilding.com. Click on the links below to see more photos of these structures.
This wooden shed could be mistaken for a tiny house. With all the decorative trim, you just need a few flower boxes at the windows to actually make this functional storage shed into an actual house! From the grey and white paint to the adorably scalloped edging, this shed is great as a standalone piece due to all the detail. In other words, this shed is adorable enough to make your whole backyard look great.

This country garden shed not only offers a covered space to pretty much do whatever you’d like with, but it adds so much character to the scene. You can easily set up chairs and table to create an adorable place to sit and have your morning coffee while reading the paper. It is a conversation piece and even a conversation space if you were to utilize it that way.

After laying out the 12 blocks, use a straight 2 x 4 and a 4-ft. level to ensure that all the blocks are level. Shim up any low blocks with strips of asphalt roofing, cedar shingles or 2-in.-thick concrete patio block. Next, form each front and rear band joist by nailing a 2 x 6 to a 2 x 8 mudsill. Set the mudsills on top of the blocks running across the front and rear of the shed. Cut a third 2 x 8 mudsill to fit along the tops of the center row of foundation blocks.
This interesting cube-shaped building is definitely not a shed. Not the way the builder used slats on three sides to provide plenty of ventilation for those evening meals in the great outdoors. Note that the entire back wall is solid to help keep the weather out, you could add outdoor curtains to help block any excess breezes and keep out the rains. What a great way to create your own outdoor family room!
Before you shingle the roof, install metal drip edge. Then nail a row of starter shingles along the bottom of the roof. Install the rest of the shingles according to the package instructions. Before painting, we filled spaces on the exterior with acrylic caulk. Then we rolled and brushed two coats of top quality acrylic exterior paint onto the trim and siding. When all of this is done, your pub shed will be complete!
Edrington used recycled and repurposed materials to build the shed. Restored garage doors were used for the south wall to allow light to filter through, good for seedlings. The floors are made of recycled brick on sand. A pull-down ladder leads to the second floor, where the architect built beds and tables as a cozy sleeping nook for his grandchildren. In the afternoons, Edrington and his wife enjoy a cup of tea in the shed.
If you have the do-it-yourself skills and an open timeframe, check out the various plans available online or for purchase. Make sure you thoroughly understand the instructions and actually have the ability and tools to do the job. Other sources for sheds include prefabricated buildings that you would order from a reputable company and kits. Some include pre-cut lumber that is shipped to your house. Before ordering, find out if additional milling, drilling, or cutting will be needed, along with necessary tools.

This waterfront shed looks like a miniature version of a rustic lodge. The scene itself is something out of a camping or hiking magazine. The serene sky in the background just encompasses this adorable shed set right next to this impressive water element. The wooden doors accent the stone makeup of the shed and the fence in the back only complements all these elements together. A gorgeous scene, for sure!
Double-check the corners and the front posts to make sure they’re plumb. Then cut and install the 4 x 8-ft. sheets of siding. Measure and cut the siding panels so that the seams align over wall studs. Rest the bottom of the panels on a temporary 1/2-in. spacer to provide space between the siding and the drip cap. Nail the siding to the studs. Follow the siding manufacturer’s instructions for spacing and nailing the siding.
When building a solid-concrete block foundation, it’s important that all the blocks be level. However, it’s equally important that the blocks in each row be perfectly aligned. The best — and fastest — way to line up the blocks is with a taut string. Install the first and last block in each row. Then stretch a length of mason’s line along the edge of the two end blocks and use it as a guide to set the intermediate blocks..
A Place to Grow recycles greenhouses to create she sheds, wine rooms, art studios, and meditation retreats. For a client in Los Osos, California, a shed is used as a sewing room and private escape. When designing studios and hobby sheds, allow room for shelving, storage, and workspace. Naturally, the space will need to be wired for proper lighting.
Also square the frame by making sure diagonal measurements from opposite corners are equal. Then tack one corner to hold it square. Finally, nail the soffit to the roof frame with 6d galvanized box nails. We used 12-in.-wide fiber cement siding for soffit material. Mount an inexpensive carbide blade on your circular saw to cut the fiber cement. Set the roof panel aside and build the other half of the roof using the same techniques.
×