Award Winning Designer, Candace Osmond has been in the industry for over a decade. She studied Interior Decorating & Design and is also an accomplished writer and multi-published author. When she's not typing away from the comforts of her desk, Candace can be found travelling to warm destinations, tending to her garden, or enjoying the outdoor haven that is her backyard. Candace currently resides in the breathtaking Maritimes of Eastern Canada with her husband, two beautiful kids and one slobbery bulldog.

I even have a friend whose parents have a bar shed. They don’t call it that, and I never realized it until writing this article, but it’s the size, shape, and build of a standard shed, located near their pool. It houses all of the pool supplies, alongside a nice 4-person bar, a beer fridge, and a sizable selection of liquor. It was right in front of my eyes all this time. I just never really thought of it as a bar shed.
I’ve been looking at building a tiny house out of (2) 12×16 barn sheds I want to have the sheds install on top of a 2′ concrete foundation wall to allow a second story loft. I’m not sure if I need footings they will be at right angles to each other separated at the corners by 3 to 4 feet I could send you a floor plan of my design and see what you think
People are often a little dubious about the capabilities of our plastic shed bases, just because they’re plastic. However, they’re stronger than the majority of other bases available and are certainly a whole lot better looking. These base panels can withstand weights of up to 420 tonnes, meaning not only can they take the weight of a shed that’s filled with everything from garden furniture to bikes and barbecues, they can also withstand the weight of a HGV and pretty much anything else you throw at it!

Hello, I plan on purchasing the 16×24 two story Everest and converting into livable cabin. I am in process of demolishing dilapidated cabin currently on site and then plan on installing footer and concrete slab. There will be 1 bathroom and small kitchen on 1st floor. Do you have any recommendations for slab (4 inch vs. 6 inch)? Any thoughts on best way to run piping? Should I give slab installer any specific directions (anchors, etc.)? Does slab need to be exactly 16×24 or should it be slightly larger? Do I need to send the schematic I prepared showing location of windows and doors?
Do not purchase materials or attempt to build this shed project unless you have studied the information provided thoroughly, and have verified all dimensions and material requirements for yourself. Also verify that the plans conform to local building codes and practices. Although every effort has been made to ensure the accuracy of the information and design, the user is ultimately responsible for the use of this information. All information provided is copyrighted and cannot be duplicated without the permission of Shedking. 
Galvanized steel stanchions, stainless steel wire, and a hardwood cap were used for the railing of this modern shed built by J. C. Stoneman Construction. Located in Port Townsend, Washington, the modern shed features a sliding glass door, clerestory windows, and a pitched roof that overhangs the porch and provides shade. The siding is made of Western red cedar.
People are often a little dubious about the capabilities of our plastic shed bases, just because they’re plastic. However, they’re stronger than the majority of other bases available and are certainly a whole lot better looking. These base panels can withstand weights of up to 420 tonnes, meaning not only can they take the weight of a shed that’s filled with everything from garden furniture to bikes and barbecues, they can also withstand the weight of a HGV and pretty much anything else you throw at it!

Thank you for visiting our blog. Yes, the 16×16 Aspen is a great choice as it offers lots of storage space and overall value. We would recommend footers that are slightly smaller than your typical one car garage. Considering ground movement, you definitely want that slab on a solid foundation to keep from cracking. Yes, the concrete pad can act as a floor with no wood floor needed, the bottom plate has to be a treated material. You’ll want anchor bolts placed in the concrete to place the treated plate to hold the shed to the concrete floor. THe shed is a true 16’x16′, so 192”x192″ are the dimensions. Great questions. Feel free to give us a call at 855.853.8558 if you have any other questions!


When indoor and garage storage isn't enough, sheds are a perfect way to introduce organization to your backyard—and to your life. Available in a wide variety of materials, styles and sizes, there is one certain to meet every need and price point. We found some stylish examples, beginning with this Little Garden shed with double-hung windows and Dutch door entrance. Available at Family Home Plans. 
At first glance, this shed looks life an old craft spot or an antique area. Admittedly it does have a bunch of rustic decoration and wood siding which is less flashy and classy than vinyl would be. However this shed is rather new and of recent design. It a combination of the past and the present. IDEA: Create a reminiscent spot with a new shed with old decoration.
Need a space to unwind and relax? Turning an old shed into a spa wonderland is not that far-fetched! Space could easily be converted into an area for your hot tub or even turned into a sauna. If you have a hot tub already, it would be easy to use a shed to build a protective covering around it. If you do not have a hot tub, you can start from scratch and turn the outdoor shed into the luxury spa of your dreams!
Simple shed designs like this one feature tongue and groove planks that are typically reserved for flooring or indoor paneling. The boards are designed to interlock along the long edges, making for an exceptionally sturdy structure. The best part is you can buy this type of lumber at your local discount hardware superstore in different lengths and a variety of different types of lumber.
If wet weather is forecast, cover the concrete with polythene for 24-hours. In warm weather, cover the base with damp sacks and sprinkle them with water over the 24-hour period, this will ensure the drying concrete will not shrink and crack. The result will be a smooth, sound and level base. The perfect foundation for the construction of a garden shed.
And since we started with a simple shed, we’re going to finish in the same tone. This cute garden shed has a very lovely, simple and clear look. It’s made with prefab wall panels and doors and windows that slip into precut openings, making the building process very quick and easy. Then all you have to go id decorate it with hanging baskets and boxes and add beautiful plants.
Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.
Edrington used recycled and repurposed materials to build the shed. Restored garage doors were used for the south wall to allow light to filter through, good for seedlings. The floors are made of recycled brick on sand. A pull-down ladder leads to the second floor, where the architect built beds and tables as a cozy sleeping nook for his grandchildren. In the afternoons, Edrington and his wife enjoy a cup of tea in the shed.

Step # 5: The concluded foundation should to certainly be stage and sq.. Do just 1 last test with an extended straight edge to see if the base is stage from just about each and every spot, as effectively as look at the diagonals to in the end verify the foundation is square. Bear in mind to brush absent any abnormal dried out sand/cement mixture that could impede the levelling of your drop. The outcome is an even, sound, stage foundation. The most perfect foundation for the producing of a backyard drop.


While every effort has been made to ensure the accuracy & effectiveness of the information displayed on this website, The Ugly Duckling House is for entertainment purposes only. All tutorials and demonstrations are not intended to be professional advice (nor substitute as such), and I make no guarantees as to the procedures and information here. Creating with my suggested methods, materials, and tools is under your own risk. Please ensure you are following proper guidelines with anything used, and seek professional advice if you don't know how to do something! Read my complete disclosure here.
Spread the concrete evenly in the shuttering, taking particular care to push the concrete into the corners and edges. Arguably the best method to lay the concrete is to do it a layer at a time and compact it until the shuttering frame is full. Leave the concrete flush with the top of the framework and smooth it out using either a wooden or plastic float.
For a seating area I cut 4 x 18 inch lengths of 3x3 post and I had some 12mm thick wood that I used for the seat but you could use ply board (I recommend 18mm for strength). Simply cut the ply to size then drive a screw through the ply board into the posts. Once made then use corner braces to secure in place to add that extra strength and make sure you test it out before you use it. If you are making a longer seating area then you may need more posts in the middle for support.

If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
×