First and foremost, you will want to construct an ornate case to serve as your liquor cabinet. This should be easily accessible to whomever may be fulfilling the function of makeshift bartender. Secondly, a handcrafted station should be installed in a fashion that is inviting to all guests. L-shaped formats can help you cram in tons of extra company, but horizontal rows are equally alluring. When it comes to the counter tops, any composition will do. Just make sure the surface matches the stools.

Did you always want to dine outside? Well, this is your chance. Although it looks a bit like a box of matches, this space may be exactly what your yard lacks. It is obviously not suitable for storage and it’s not available as a building kit but it sure adds some elegance to your backyard. It’s not very cheap either, but this depends on the contractor.
If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
Set up a levelled formwork. This involves measuring, cutting and fitting timber to the shape of the base in order to contain the concrete. Check diagonal measurements to ensure the formwork is square and level as this will determine whether your shed base is 100% sturdy. Next, spread a layer ofwell-compactedd hardcore (all-in ballast or crushed gravel) and cover with a liberal amount of sand. This needs be well compacted and flattened down, preferably with a compacting tool or roller.
For a seating area I cut 4 x 18 inch lengths of 3x3 post and I had some 12mm thick wood that I used for the seat but you could use ply board (I recommend 18mm for strength). Simply cut the ply to size then drive a screw through the ply board into the posts. Once made then use corner braces to secure in place to add that extra strength and make sure you test it out before you use it. If you are making a longer seating area then you may need more posts in the middle for support.

Thank you for visiting our blog. Concrete isn’t the only method to give positive results over time for a foundation and doors working properly. Using gravel can have positive results over time compared to concrete. Make sure the gravel is packed down. And we recommend using solid masonry blocks on top of gravel with no more than 48” spacing between blocks. I hope that helps your project!


The landscape surrounding this shed makes it look like it’s part of a fairy tale. The colors help with that as well. The combination of red and white give it a typical barn look and the roof only completes the perfect image. It’s like looking at a house from a cute computer game. All the colorful plants, grass and those rocks further make the whole image even more beautiful.
We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
This is another example of surroundings that fit with the garden shed. Actually, it would be more accurate to say that the shed blends and fits with its surroundings. The dark colors blend with the woody area and the darker mulch. The green trim has enough of green to connect at least somewhat with the greenery around it. IDEA # 27: Make your shed blend with nature instead of change the natural setting to fit your shed.
If you're like most people, your shed is probably a little hut in your backyard that you don't think about much—a tiny eyesore filled with rusty tools, boxes full of junk and other knick knacks.  Which is why we're loving that home owners are starting to repurpose these forgotten storage spaces into something awesome: tiny bars located in their very own backyard.
This outdoor structure is a little bit of both: you have a small storage space to the right and a cozy space to the left where you can place a few chairs and watch the rain pour on your garden or look at the stars, since part of the roof is made of glass. The disadvantage is that it’s not going to be cheap to build considering it’s a pretty specific design.
ClickBank is the retailer of products on this site. CLICKBANK® is a registered trademark of Click Sales, Inc., a Delaware corporation located at 917 S. Lusk Street, Suite 200, Boise Idaho, 83706, USA and used by permission. ClickBank's role as retailer does not constitute an endorsement, approval or review of these products or any claim, statement or opinion used in promotion of these products.
On top of this, check that the best location in your garden allows the easiest access, including the side of the shed in order to apply treatment to your shed. Have a visual image in your head; you may not want to carry heavy objects to and from the bottom of your garden. For our summerhouses, you may want to consider whereabouts in your garden there is the best access to natural light or even the best view.
This step is easier with two people. Start by measuring the length of the ceiling then cut the amount of straw cladding you need – allow a 5cm surplus.  You will need two lengths.  While one person holds the straw cladding in place the other can nail it in place. Hit the nail in until secure then hammer it at a 90-degree angle so it holds the straw cladding in place.  Put nails in every 15-20 cm to secure.
This is another example of surroundings that fit with the garden shed. Actually, it would be more accurate to say that the shed blends and fits with its surroundings. The dark colors blend with the woody area and the darker mulch. The green trim has enough of green to connect at least somewhat with the greenery around it. IDEA # 27: Make your shed blend with nature instead of change the natural setting to fit your shed.
The blocks measure 8 in. wide by 16 in. long and come in 4-in.- and 2-in.-thick units. The thicker blocks are placed first, with the thinner “patio” blocks laid on top when you need to raise one block even with the others. In some cases, you may need to stack two or three 4-in. blocks on top of each other to raise the lowest corner of the foundation so it is even with the highest corner.
This garden shed was built to be one of those sheds for sale that stands heads and shoulders above the rest. It was designed to appeal to what is popular in the current age. With a classy dormer roof and modern vinyl windows, it has all the modern eye is looking for. SHEDS IDEA # 19: Order a shed with all the bells and whistles to bring some class to your backyard. Start with filling out our FREE Quote Request Form.
Beauty is powerful. Even in an aged setting or with old material, beauty can still ooze out. In fact sometimes the agedness enhances the beauty. This is especially true with this old shed. While its waterwheel idea and the old wood may go back years, its beauty is still worth crediting. Some of the old things in life make great garden shed ideas. IDEA: Create a garden environment with old things such as a waterwheel.
Also, sheds are usually made of wood. But you can change that too if you have a more elaborate plan for your garden shed. This is a particularly imposing shed with cedar-shake siding and shingles and a brick exterior, mortared stone steps and a large door with matching windows. It’s a beautiful getaway and you don’t even have to go far to reach it.
Next, you will need to insert wooden shuttering or formwork around the edges of your excavated area. This will need to be made from 6"x1" timber and screwed or nailed into position. If need be, wooden pegged to form a square, level solid formwork to hold back the hardcore and concrete (in the next step). The reason for the original excavation to be 2" bigger all the way around is to take into consideration the wooden frame, you will now have an internal area of 8"x6". If you decide to use thicker timber you will need to take this into consideration at the stringing out stage. 
Connect three windows to form the window assembly for the side wall (Figures R and U). Use a pair of 2x4s as spacers between each window. Screw through the window frames into the spacers to hold the windows together. Tip the triple window assembly into the window opening. Shim under the windows until about 3/8 in. of the top frame is exposed on the outside. Shim between the studs and the window frame to level and plumb the window unit and to adjust the frame until there’s a consistent space between the window frame and the sash. Make sure the window frames are flush to the siding. Then screw through the window frames into the studs to hold the windows in place. We added Stanley Storm Window Adjuster hardware to the windows to hold them open and to lock them.
Factor in size, because a really small shed probably won't be ideal for a bar. Think about how many people you plan to host on a regular basis, as well as your ideal seating (stools take up less room than a booth). Keep in mind that your local building department might have a size restriction on backyard sheds built without a permit. Around 120 square feet is usually a safe bet.
At MOTHER EARTH NEWS, we are dedicated to conserving our planet's natural resources while helping you conserve your financial resources. You'll find tips for slashing heating bills, growing fresh, natural produce at home, and more. That's why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.95 (USA only).
Do not purchase materials or attempt to build this shed project unless you have studied the information provided thoroughly, and have verified all dimensions and material requirements for yourself. Also verify that the plans conform to local building codes and practices. Although every effort has been made to ensure the accuracy of the information and design, the user is ultimately responsible for the use of this information. All information provided is copyrighted and cannot be duplicated without the permission of Shedking. 

Thank you for visiting our blog. When we install we put them on 4×4 treated runners. You can put pavers under the runners if you choose. For more information on leveling and installing with the runners and pavers, please visit this link . As far as the gravel goes that is your preference on whether to put them down or not. Sounds like you have a good foundation! Feel free to give us a call if you have any other questions.


You should then lay approximately 3” (75mm) of concrete. Concrete can be produced using either bags of dry mixed concrete with small amounts of water added at a time, or making a mixture of ‘all-in’ ballast, cement and water. For this second alternative, it is mixed in the ratio of 1 part of cement for 5 parts ‘all-in’ ballast. ‘All-in’ ballast is sold in 40kg bags at most building merchants or DIY stores (Note approx 1.25 will be required to produce around 1 cubic foot of concrete). Do not allow the mix to become too wet as this will weaken the concrete.
This incredible shed has been transformed into a space center! The space shed has a telescope in it perfect for viewing all the stars at night. This would be the best “playhouse” idea for a kid who is really into science, or even for any-aged space geek who would love to take full advantage of this star platform! I, for one, would absolutely love this space and would probably never leave it!
Is there have a bunch of old materials laying around that could be put to good use? A few cool shed ideas, can turn even seemingly useless materials into a great backyard garden shed. Plus it can be done cheaply. With some old windows, used pallets, and even driftwood, plus a host of other retired materials, these garden shed ideas can bring your backyard garden to life.
Without the correct base erecting a shed can prove very tricky. It is extremely important that all garden buildings are constructed on a firm and level base which is constructed from the correct, durable material. Assembling the base incorrectly can lead to future deterioration of the product such as doors dropping out of square, thus becoming complicated to use or causing a water leakage.
This is the last of our photos on garden shed designs. However it is not the least. While most of the other nature-friendly shed designs are more about meshing with the greenery around them, this shed is more fitting to the barrenness around. The setting here is dryer and more desert-like, but no less beautiful. The natural wood look fits great with the sand and the rocks as well as the more desert friendly plants. IDEA: Try a desert garden and add a wooden and unpainted shed to compliment it.
Included with your instant download will be email support from me about any questions you might have on how to build a shed or about the plans or construction methods covered. I am very pleased to offer this service for the low price I charge, but believe it or not, I don't get that many support inquiries and I feel this is because of the comprehensive nature of the plans for all the information needed to successfully build your own shed.

If you don’t already have a garden shed, but wish you did, take a look at the sheds shown here. Whether you want a simple utilitarian structure for storing tools and equipment, a workspace for potting, a playhouse for kids, a fanciful focal point for outdoor living, or something in between, you’re sure to find inspiration in these photos posted by members of our sibling site FineHomebuilding.com. Click on the links below to see more photos of these structures.
Figure G (in Additional Information below) shows details for the marking jig. Photo 12 shows how to use this setup to draw the curves for the window pieces. Next cut the side pieces (Figure F, in Additional Information below). Set the side pieces in place over the top of the header and mark the angled cuts (Photo 13). Finish the curved trim piece by first cutting the angles on each end, and then sawing the curves with a jigsaw and sanding them smooth. Use the marking jig to lay out the curved brace, too (Figure G, in Additional Information below).
×