I’m trying to figure out what all needs to be done to be able to build a shed in my yard the specifications are as follows it’s a metal prefab shed that’s 14′ wide 31′ long and 8′ tall and weighs roughly 1800lbs, floor inside must be able to hold the weight of a full-sized truck and tools. Where do I need to go for permits and which do I need and what type of foundation do I need in order to support all the weight?

Connect three windows to form the window assembly for the side wall (Figures R and U). Use a pair of 2x4s as spacers between each window. Screw through the window frames into the spacers to hold the windows together. Tip the triple window assembly into the window opening. Shim under the windows until about 3/8 in. of the top frame is exposed on the outside. Shim between the studs and the window frame to level and plumb the window unit and to adjust the frame until there’s a consistent space between the window frame and the sash. Make sure the window frames are flush to the siding. Then screw through the window frames into the studs to hold the windows in place. We added Stanley Storm Window Adjuster hardware to the windows to hold them open and to lock them.
It can be easy to get excited and overestimate your DIY abilities when you start a new project. The passion and excitement makes you want to dream big and get creative. But blindly following your imagination can be a step in the wrong direction. If you’re a newbie to DIY woodworking, then you’ll probably want to keep it simple. Otherwise you run the real risk of ending up with a sub par build or even having to rebuild it altogether.
×