This backyard shed’s design is a nod to the property’s farmhouse. But beyond its charming shake siding and robin’s egg blue door, the design is practical and savvy. Many of the materials used to build the shed were salvaged from a home renovation. The shed can also be moved, as it is set on concrete piers on gravel and sand instead of a permanent foundation.
*Please note the content in this blog post is intended only to provide a summary and general overview on building a pallet bar. It is not intended to be comprehensive. You should refer to the instruction and safety manual of tools and paints you use and seek professional advice if unsure of how to execute the tasks before acting or relying on any of the instructions.
You can use the backyard garden shed as a space for housing your lawnmower, planting supplies, pots, seeds, old furnishings, etc. On the other hand, you could even install a backyard garden shed as a tiny house the kids can play in. However, you choose to use your backyard garden shed, there are plenty of ways to incorporate the space into your garden scene! Here are some of the best ideas on how to use a backyard garden shed in your own garden.
Once you have a pile of pallet wood start by laying bits of wood on the floor. If you have different sizes and shades then mix them up to get a great effect. Start in the top corner and screw the boards in place using an electric screwdriver with screws long enough to go through the pallet wood and floor of the shed.  You’ll need to cut some pieces to size so use the tape measure to mark the wood then cut using a saw of choice.  Once the floor is down then line all the walls apart from the doors and eaves.
On top of this, check that the best location in your garden allows the easiest access, including the side of the shed in order to apply treatment to your shed. Have a visual image in your head; you may not want to carry heavy objects to and from the bottom of your garden. For our summerhouses, you may want to consider whereabouts in your garden there is the best access to natural light or even the best view.
We built inexpensive windows for the shed using plastic barn sash mounted in 1×4 pine frames (Photo above and Figure Q and R). Start by measuring the sash and building a 1×4 frame that’s 1/4 in. wider and taller than the sash. Cut 10-degree angles on the bottom of the sides to provide a sloping sill. Cut 1×2 stops to fit in the frame and position them to hold the sash flush with the outside edge of the 1×4 frame. Then attach galvanized screen door hinges to the frame, set the sash in place and drill holes for the fasteners. Since the plastic isn’t strong enough to hold wood screws, we drilled holes through the sash and attached the hinges with machine screws, washers and nuts.
Mark the position of the rafters along the beams at 16-inch centers and carefully nail them in place. We even went so far as to set each nailhead to firmly pinch the rafter down against the beam. We nailed the front fascia in place and moved on to the skip sheathing for the roofing. Note that two pieces of sheathing are nailed on at the peak and at the base. The rest are spaced evenly between them.
Modifications can be made to these plans if need be such added doors, windows, building dimensions, etc. Stud spacing, floor joist spacing, and roof joisting spacing is 16" on center, Materials can be changes as well such as wall, roof, and paint coverings. If you wish to print these plans, they can be printed to scale on 8x11 paper. A full pdf files is available on my website, along with other shed plans too. Building Plans Here
On top of this, check that the best location in your garden allows the easiest access, including the side of the shed in order to apply treatment to your shed. Have a visual image in your head; you may not want to carry heavy objects to and from the bottom of your garden. For our summerhouses, you may want to consider whereabouts in your garden there is the best access to natural light or even the best view.
Are you against the idea of a treehouse because you fear for your kids’ safety? Then, here’s the solution. If you don’t want them to hate you ever since their childhood (they’ll have plenty of occasions later on), you’ll buy a nice shed and you will paint it to turn the construction into a beautiful playhouse for your children. The shed in this photo was actually turned into a playhouse for 2 little girls.
The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.

This shed brings together antiquity and modernity. It has the simple and clean modern look. It starts with the simple fours walls and simple slanted roof. However, the decoration is different. The bronze paint color gives it more of a rustic feel. Plus some of the knick knacks are more reminiscent that the shed style is. It is one of those garden shed ideas that takes advantage of the best of both worlds. IDEA # 21: Be creative and see how you can bring two different decoration styles together in an attractive way.
For this reason, I am planning to run utilities to the building including natural gas, water, sewer, etc. in order to locate the sewer line for proper flow (connection location) I was hoping to have a standard footer with crawl space installed and attached the building on top of it (just like a house). This way I could access the utilities by removing sections of the floor so I could run the sewer line (and other utilities) to exact areas of the building. Is it possible to have the building constructed/attached on top of this type of footer system?
Well, not these plans. You have the option of building a very functional and spacious lean-to shed on different foundations. Your foundation choices are: concrete slab, a wooden floor supported by concrete piers, or a wooden floor supported by skids. That lost option also means that your lean-to could be mobile as well so you won’t have to decide where you want to permanently put it.
×