For example, the last three sheds I built were trimmed with white PVC trim boards instead of painted cedar 1 x 4s. This new plastic lumber, which I used for the rake, fascia, frieze and corner boards, is impervious to bugs, warping, splitting or decay, and it never needs painting. Other low-maintenance options include: vinyl or aluminum windows, faux-slate roof shingles, fiberglass or steel doors, composite decking for steps, and fiber-cement siding. (I don't usually recommend aluminum or vinyl siding for sheds; neither material is rugged enough to survive the inevitable beating outbuildings take.)
Time and time again we’ve discussed the many options available when it comes to building a shed base. We’ve gone through the pros, the cons, the aesthetically pleasing, the permanent and the portable, but we’ve never given a definitive answer on which product we consider to be best. Today, that changes, and we’ll give you the lowdown on the product we consider to be the best, based on ease of use, price, practicality and customer satisfaction.
Why buy a greenhouse if you can make it yourself? Especially if it is much cheaper? A cool shed like this can be done very cheaply. The main materials needed are old replacement windows, an old door, a few pieces of wood for rafters, and some polycarbonate roofing sheets. IDEA: Rather than throwing away your old windows, door, and other materials, turn them into a greenhouse shed.

Concrete requires 3” (7.5 cm) of compacted hardcore (all-in ballast or other crushed rubble/gravel) underneath the 3″ concrete layer. The base can be level with the ground or raised above it. If you want it to be level, excavate the top earth to 6” (15 cm), to allow for the hardcore layer and 3” (7.5 cm) of concrete. Level the area with a rake and spade and remove the pegs.

On top of this, check that the best location in your garden allows the easiest access, including the side of the shed in order to apply treatment to your shed. Have a visual image in your head; you may not want to carry heavy objects to and from the bottom of your garden. For our summerhouses, you may want to consider whereabouts in your garden there is the best access to natural light or even the best view.

Before you shingle the roof, install metal drip edge. Then nail a row of starter shingles along the bottom of the roof. Install the rest of the shingles according to the package instructions. Before painting, we filled spaces on the exterior with acrylic caulk. Then we rolled and brushed two coats of top quality acrylic exterior paint onto the trim and siding. When all of this is done, your pub shed will be complete!

Connect three windows to form the window assembly for the side wall (Figures R and U). Use a pair of 2x4s as spacers between each window. Screw through the window frames into the spacers to hold the windows together. Tip the triple window assembly into the window opening. Shim under the windows until about 3/8 in. of the top frame is exposed on the outside. Shim between the studs and the window frame to level and plumb the window unit and to adjust the frame until there’s a consistent space between the window frame and the sash. Make sure the window frames are flush to the siding. Then screw through the window frames into the studs to hold the windows in place. We added Stanley Storm Window Adjuster hardware to the windows to hold them open and to lock them.
The “pub” part of these pub plans is a relatively new concept. Originally, I was thinking I’d add a small pop-out window to one side of my shed as a small greenhouse-type area: cover it in glass, place it on a side that gets a lot of sun, and use it to start seedlings or propagating my hydrangeas. But, after one of my regular lunches with Dad, he passed along a copy of Family Handyman that included this project, and it included a shed with one side for entertaining!
Why buy a greenhouse if you can make it yourself? Especially if it is much cheaper? A cool shed like this can be done very cheaply. The main materials needed are old replacement windows, an old door, a few pieces of wood for rafters, and some polycarbonate roofing sheets. IDEA: Rather than throwing away your old windows, door, and other materials, turn them into a greenhouse shed.
First and foremost, you will want to construct an ornate case to serve as your liquor cabinet. This should be easily accessible to whomever may be fulfilling the function of makeshift bartender. Secondly, a handcrafted station should be installed in a fashion that is inviting to all guests. L-shaped formats can help you cram in tons of extra company, but horizontal rows are equally alluring. When it comes to the counter tops, any composition will do. Just make sure the surface matches the stools.
If the building site is high and dry, you can set the blocks directly on the ground. However, if there’s any chance that rain runoff will occasionally drain under the shed, you’ll need to use a shovel to remove a patch of grass under each block, compact the soil with a hand tamper, then cover the exposed dirt with 2 in. or 3 in. of gravel before setting the blocks. The gravel bed will ensure that the soil beneath the blocks won’t wash away or become soggy.
The female version of man caves are she sheds: havens to escape that can be designed and decorated in whatever style the owner desires. Inspired by a tiny hummingbird viewed nearby, this shed is aptly named Hummingbird Cottage. Lovely photos on Instagram reveal that the shed is used for art projects, as a retreat, displaying vintage pottery, and for entertaining friends. Extras like a hanging faux-crystal chandelier, potted flowering plants, wreaths, and stained glass give it a personal touch.

Building a 12×20 shed. Thinking about using 2×8 floor joints and rim board with the joists setting on 6×6 pt timbers tucked under the long 20′ sides with a 20′ 4×6 running parallel in the center. There would be support blocks at the 4 corners and in the center of the 12′ width. Then also in the middle of the three 20′ runs. Total of 9 support blocks altogether with them setting on gravel base ground. Does this sound like a good plan to you?
This shed brings together antiquity and modernity. It has the simple and clean modern look. It starts with the simple fours walls and simple slanted roof. However, the decoration is different. The bronze paint color gives it more of a rustic feel. Plus some of the knick knacks are more reminiscent that the shed style is. It is one of those garden shed ideas that takes advantage of the best of both worlds. IDEA # 21: Be creative and see how you can bring two different decoration styles together in an attractive way.
How about scouring the river for a few days to gather wood for a shed? That may sound like a ridiculous and like one of those cool shed ideas. However, it is cheap, out-of-the-box, and likely a possibility for a unique and very rustic garden centerpiece. It may not be classy but why does it need to be. It is definitely an idea with potential for a different kind of beauty. IDEA: Gather some driftwood and turn it into a rustically beautiful garden shed

Omit the bird’s-mouth from four rafters and use these on the ends. Cut the 2x4s for the ridge and subfascia to length and mark the rafter positions on them. Line up the rafters with the marks and nail through the ridge and subfascia with 16d nails to secure them. When the roof frame is complete, line up the subfascia with the chalk line on the platform and tack it in three or four places with toe screws to hold the frame straight while you install the soffit.
×