Thank you for visiting our blog. Asphalt has no values worthy of anchoring a structure to since upheave on it can occur easily. I understand you are not anchoring to it but asphalt can get soft in extreme heat. Asphalt may compress unlike gravel, which once leveled, should remain solid for a shed foundation. Suggest you stay with proven fill under foundations such as a gravel intended for this use. Your local gravel supplier can recommend the size. I hope this helps answer your questions. Feel free to give us a call at 855.853.8558 if you have any other questions. Have a great day!
Wood foundations are typically built using solid concrete leveling blocks which are 8” x 16” and no more than 2” high. Each block is arranged in evenly spaced rows by placing one in each corner and at each break. These concrete leveling blocks will support the floor. If you choose not to use concrete leveling blocks, we recommend using pressure treated lumber to support the wooden floor frame.

This shed is outstanding because it is built of materials that are still close to their raw form. A wooden shed fits in better with nature. Vinyl sheds or buildings built of other materials, can be can be great for some situations. However for a natural environment wood is much better. First of all wood is a natural product. Secondly it fits better in a woodsy area. IDEA: Just to say you can do it, build a shed with 1) natural products and 2) products that are as much in their raw form as possible.

This is dependent completely on the size of your shed. For the majority of our Wooden Sheds, there are preattached bearers on the underside of the floor running the length of the building. However, for the 10x8 and 12x8 buildings with 28x44mm framing, the bearers will run the width. You will need to take this into account when planning the number and size of additional timber bearers you require – here’s a few examples;

This tiny office space is perfect for those times you need to get away and focus on some important work. Whether you are a work-from-home person or an individual that has a freelance side gig, it is always great to have a space that is just for you and getting your work done. Once you have created this space, your mindset will automatically be in work mode every time you enter it.
This open concept garden shed almost looks like a farmhouse. The open area would be perfect as a gathering area for guests or partygoers for your next backyard soiree. The super cute furnishings make this space absolute charming and it would be hard to pass up the opportunity to sit in this adorable, tiny space. This is a great space to utilize storage and double as an entertainment venue for later.

When it comes to building a shed on a budget, one of the best ways to save money is by using reclaimed or recycled wood for every part of it you can. Depending on where you live, (at least in my area) there are always old homes being torn down. Most of this wood is still perfectly usable and is more affordable than buying new. Not only this, but you are doing your part to reduce the number of trees being cut down.

This whimsical garden shed looks like something you would see in a “Lord of the Rings” movie. With its almost twisting structure sitting in the middle of this forest landscape, I am almost surprised I do not see a tiny Hobbit poking about with a pipe in hand. It is a truly gorgeous setup and this just goes to show how versatile these garden sheds can be.
If the building site is high and dry, you can set the blocks directly on the ground. However, if there’s any chance that rain runoff will occasionally drain under the shed, you’ll need to use a shovel to remove a patch of grass under each block, compact the soil with a hand tamper, then cover the exposed dirt with 2 in. or 3 in. of gravel before setting the blocks. The gravel bed will ensure that the soil beneath the blocks won’t wash away or become soggy.
Without the correct base erecting a shed can prove very tricky. It is extremely important that all garden buildings are constructed on a firm and level base which is constructed from the correct, durable material. Assembling the base incorrectly can lead to future deterioration of the product such as doors dropping out of square, thus becoming complicated to use or causing a water leakage.
From what I’ve gleaned, the trend started in the UK with Community Gardens, where everyone is given an allotment to grow fresh fruit and vegetables. Oftentimes, these allotments have sheds for storing gardening tools and what not. Naturally, folks started enjoying a quick beer or cocktail in these sheds, and eventually, a few people gathered, mini happy hours casually formed, and from there, the natural evolution of bar sheds began.
the biggest problem I had was that the instructions I downloaded from the manufactures web site had a different cut list than the documents that came with the kits. I had already cut the lumber based on the downloaded list so I was dismayed to find that two of the lengths specified in the packaging were longer than the ones I cut from the downloaded plans. I did try assembling an arch with both specs, but nether of the lengths resulted in an arch that actually matched the frame. I wound up forcing things to fit and got the framing up, but it was much harder than it looked and you need at least three people to put it all together.
If you do not have a lot of bulky gardening equipment, but would still like to protect and store your standard tools, acquiring a smaller shed may be the best bet for you. This convenient space will provide shelter for all the gardening essentials and will help you keep all your tools organized. What a great feeling to know that all your tools are going to be organized within the same space and you do not have to go out and hunt for them all.

By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.
We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
Flowers are always a good idea when it comes to creating a tiny shed space. No matter what you are turning your shed into, you should be sure to decorate the landscape around it appropriately. Going for a rustic, desert theme? Succulents and cacti are your go-to. Prefer an English garden space? Gorgeous multi-colored flowers and tiny table set up for tea would be perfect.
The amount of rainfall the UK is subjected to each year means that the ground is constantly trying to dry out. When a shed is placed directly onto grass or soil, as some people like to do, when it rains and ground becomes sodden, the shed (or anything heavy for that matter) will start to sink into the ground. This sinking is rarely even, as very often some areas of ground are considerably stronger, or more compacted, than others. This means that as soon as the shed starts to sink, it becomes uneven and, overtime, is left under immense pressure because of this strain.
This small backyard shed is a minimalist approach to a larger storage facility. Its classic design serves both in function and as a great element to have in a backyard setting. The shed looks sleek, modern and interesting. It does not look like a standard storage shed, so if you were trying to disguise the shed as something else, this would be a great design to execute that.

Spread the concrete evenly in the shuttering, taking particular care to push the concrete into the corners and edges. Arguably the best method to lay the concrete is to do it a layer at a time and compact it until the shuttering frame is full. Leave the concrete flush with the top of the framework and smooth it out using either a wooden or plastic float.
This adorable teak storage shed is perfect to sit on a patio or covered garden area when you need to just store some of the essentials, such as garden shovels, brooms, and rakes. Almost acting as a storage closet, this nifty space definitely does not take up too much space and can almost just blend into the background. This is ideal for a small garden area or even a side garden area that still needs a little bit of storage capability.
The roof truss can be built using 2x4 or 2x6 lumbers. There are different ways to build the truss, the most common is cutting out the rafters and assembling them using gussets. The easiest way to build the roof truss will be using plans. The other option will be to lay the 2x4’s or 2x6’s on the level floor set them how you want your roof and make a template. Once you are happy with the look of your template you can build the rest.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.

Although skids are often set directly on the ground, I prefer to lay them on a bed of gravel. The stone creates a very stable base that’s not likely to settle or wash away. Begin by laying the skids in position on the ground, then mark around each one using spray paint or flour sprinkled from a can. Move the skids out of the way, then use a flat shovel to remove the sod and about 2 in. of soil from the marked areas. Check the excavated areas to make sure they’re close to being level. If they’re not, remove a little more soil from the high spots. Next, add 3 in. to 4 in. of gravel. Compact the gravel with a hand tamper or gas-powered plate compactor, then replace the skids.
*Please note the content in this blog post is intended only to provide a summary and general overview on building a pallet bar. It is not intended to be comprehensive. You should refer to the instruction and safety manual of tools and paints you use and seek professional advice if unsure of how to execute the tasks before acting or relying on any of the instructions.

The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.

Generally, smaller sheds of up to 8×6 do not need a foundation. Small sheds can be rested on crushed stone with either treated wood foundations or concrete foundation blocks. Large sheds will need to have strong foundations. Considering Backyard Buildings smallest shed size is 8×8, all of our sheds will need a foundation setup prior to the arrival of one of our installers.
We built inexpensive windows for the shed using plastic barn sash mounted in 1×4 pine frames (Photo above and Figure Q and R). Start by measuring the sash and building a 1×4 frame that’s 1/4 in. wider and taller than the sash. Cut 10-degree angles on the bottom of the sides to provide a sloping sill. Cut 1×2 stops to fit in the frame and position them to hold the sash flush with the outside edge of the 1×4 frame. Then attach galvanized screen door hinges to the frame, set the sash in place and drill holes for the fasteners. Since the plastic isn’t strong enough to hold wood screws, we drilled holes through the sash and attached the hinges with machine screws, washers and nuts.
This lean-to shed features clapboard style siding which is not only easy to install but provides exceptional resistance to rain, wind, and snow. While you can build your shed from brand-new lumber, you could also opt to save money by building your shed from used lumber. The doors appear to be made from tongue and groove lumber but could also be made from pre-grooved plywood sheets that give the same appearance for far less money.

This free shed plan is designed to match the facade of your home and built to add value and appeal is a great long-term investment and a smart build. In one weekend you can have a perfectly suited diy wood shed that looks amazing and works great to keep wood dry, and keeps wood easily accessible. You can trim this woodshed in the same exterior material that your home has and roof it with the same shingles. This shed plan will keep the vermin out and your wood stash in great condition. Good overall firewood storage shed plan!
This free shed plan is designed to match the facade of your home and built to add value and appeal is a great long-term investment and a smart build. In one weekend you can have a perfectly suited diy wood shed that looks amazing and works great to keep wood dry, and keeps wood easily accessible. You can trim this woodshed in the same exterior material that your home has and roof it with the same shingles. This shed plan will keep the vermin out and your wood stash in great condition. Good overall firewood storage shed plan!

I am planning to build a 20 X 16 shed in my yard in Brandon, FL. I want to be able to pull my truck in to work on it at times. I will be putting it on a Wood deck platform. What it the best ideas for weight support for the 5K Lb. truck? IE: 2X6s, 2X8s what type f spacing is best and which direction should the joists be going in reference to the roll up door? And help would be appreciated.


The same thing can happen with concrete or slab bases too, because each time it rains, more and more of the hardcore is broken down as the sandier elements of the concrete are washed away (this is the same element that the rain water washes out of soil). Eventually, the same thing happens as with a compacted soil base, albeit it’s a much lengthier process. The point is though, the only way to rectify the impact the rain has had is to have the shed professionally lifted and the base built back up again.

Concrete starts to harden and set about two hours after it has been mixed, so it must be laid, tamped (packed down) and given its finish within that time. Divide large areas into bays or sections which can be completed one at a time before they begin to set. You can walk on the concrete after three days and remove the formwork after five days (but as always, check any product instructions for the mix you are using as there are rapid-setting options available).

Also, sheds are usually made of wood. But you can change that too if you have a more elaborate plan for your garden shed. This is a particularly imposing shed with cedar-shake siding and shingles and a brick exterior, mortared stone steps and a large door with matching windows. It’s a beautiful getaway and you don’t even have to go far to reach it.
Test-fit the pattern rafter and adjust its notches. When it fits accurately all along the beams, use it to mark and cut the remaining rafters. First, cut all the rafters to length. Then clamp together all the rafter stock, including the pattern rafter, edge up. Mark and cut all of the notches to match the pattern rafter. Use a chisel to finish each notch.

Lay down a covering of compressed gravel about 3 inches deep. Mix the cement with ballast in a ratio of 1:5. Keep adding small quantities of water the mixture as you mix but make sure it doesn’t become too diluted. Pour the concrete into the foundation and completely fill the framework to the top. The excess of concrete can be leveled down with the edge of a timber board by using a cutting motion along the entire top of the freshly laid concrete.
There are several ways to economize when building a shed: Install three-tab roof shingles instead of architectural shingles, or use grooved-plywood siding in place of cedar bevel siding. But don't ever skimp on the building materials used for the floor frame or plywood floor deck. I can't tell you how often I've walked into a shed and found the floor to be dangerously spongy. One building in particular had a floor so badly rotted it felt like one of those inflatable moonwalk attractions you see at carnivals.
The plans showed up stapled together, with floor plans, an isometric drawing, and then half of the instructions are for the concrete pad/anchors, with alternative designs for people in wetter locales. Finally there are some pages of general materials advice. It's really a great deal, when some garage plans are 200 bucks. Those, I believe, are a bit more detailed, but then this structure is not meant to be a crazy engineering undertaking. The plans are worth the 30 dollars.
×