Remember small amounts of water should be added at a time, and mixed into the concrete. Be careful as excessive amounts may make the cement too sloppy and it needs to stay reasonably dry. Spread the concrete evenly and slightly above the formwork. This can be then levelled off with a long straight edge of timber resting on the formwork. Use a sawing motion slowly over the entire surface of the freshly laid concrete.

Set up a levelled formwork. This involves measuring, cutting and fitting timber to the shape of the base in order to contain the concrete. Check diagonal measurements to ensure the formwork is square and level as this will determine whether your shed base is 100% sturdy. Next, spread a layer ofwell-compactedd hardcore (all-in ballast or crushed gravel) and cover with a liberal amount of sand. This needs be well compacted and flattened down, preferably with a compacting tool or roller.

Hello, I plan on purchasing the 16×24 two story Everest and converting into livable cabin. I am in process of demolishing dilapidated cabin currently on site and then plan on installing footer and concrete slab. There will be 1 bathroom and small kitchen on 1st floor. Do you have any recommendations for slab (4 inch vs. 6 inch)? Any thoughts on best way to run piping? Should I give slab installer any specific directions (anchors, etc.)? Does slab need to be exactly 16×24 or should it be slightly larger? Do I need to send the schematic I prepared showing location of windows and doors?

If you don’t already have a garden shed, but wish you did, take a look at the sheds shown here. Whether you want a simple utilitarian structure for storing tools and equipment, a workspace for potting, a playhouse for kids, a fanciful focal point for outdoor living, or something in between, you’re sure to find inspiration in these photos posted by members of our sibling site FineHomebuilding.com. Click on the links below to see more photos of these structures.
This adorable teak storage shed is perfect to sit on a patio or covered garden area when you need to just store some of the essentials, such as garden shovels, brooms, and rakes. Almost acting as a storage closet, this nifty space definitely does not take up too much space and can almost just blend into the background. This is ideal for a small garden area or even a side garden area that still needs a little bit of storage capability.
Homestead Structures would be happy to help you plan and build your new outdoor bar shed. Whether you’re looking for someone to complete the structure start to finish, or you just want a bar shed kit to build yourself, our product specialists would love to help you out! Call us at 877-272-7252 or fill out the form here to discuss your backyard project.

The wooden portabase is a time and cost saving base perfect for garden sheds. The portabase is constructed from timber and comes in a range of sizes to suit different garden buildings. The base features spikes on each corner; these spikes can be sunk into the ground offering a stable base for a garden building. You will need to ensure the ground you install your portabase onto is level otherwise your building could end up getting damaged.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
Additional options include ready-built sheds that are shipped completely assembled. Find out if these will need to be finished, sanded, and painted or stained. Prefab and already-built sheds are an attractive concept, but investigate shipping costs. Consider feasibility and logistically how you'll manage the project. Some sheds are delivered by a truck equipped with a crane. Will the crane be able to drive on your property and deliver the building without tearing down walls or fences or plowing over a lawn or garden?

Hello, Sarah! This is my first time reading your blog, and I think this is a very fun idea. I had never heard of a “Pub shed” before, some place you could use for drinks/snacks/entertaining, but also for much needed extra storage in the house! I’m not a DIYer, but I know I get challenged getting all entertainment center, mini music studio, and mini gym/training area in one bedroom, but I manage! haha! It will be fun to see how you get this project done.
Some sheds ideas take very little money, but some others are much more involved. However, that is the idea, namely, to provide ideas that match a wide range of needs and desires. The following ideas are more geared to higher spending limits. The are ideas more geared to keeping up with the Joneses. pending more money. They are the modern and classy garden shed ideas.

Plastic shed bases are available in various colors. We sell white, black and green so the base can be as obvious, or as inconspicuous as you like. As it’s advisable that the shed’s base is larger than the floor of the shed, you can even create a decorative boarder using the pavers, filling each with either soil and grass seed, gravel or bark – other fillings can also be used but these are by far the most popular.
In a Vero Beach, Florida, midcentury modern neighborhood, Sanders Pace Architecture retained the lines and essence of the original house while redesigning it for their client's 21st-century lifestyle. Although it's at the front of the house and initially might resemble a garage, the detached "shed" can be used as a private studio or for guests. Because it's located on the coast, hurricane-proof doors were needed, but cedar was installed over them for an attractive but sturdy structure.
Pasadena, California, is known for its Craftsman style homes, a great number of which have been carefully preserved and restored. Owned by a University of Southern California (USC)-educated architect, Nott & Associates specializes in the Craftsman style. For a backyard shed, Nott custom designed and constructed the wooden doors, which include period-perfect details and hardware.
Garden sheds are very common and that’s because of their multiple functionalities. They can be used for storage for all the items you no longer have room for in your house but mostly for garden supplies and tools. Also, they commonly used for hobbies. They’re like a mini-home for all your collection items and memorabilia, like a sanctuary for personal items. Moreover, garden sheds also make great workshop spaces. And since their functionality varies from person to person and from type to type, so does their design.
Start by cutting the 2×8 ridge board to length and marking the rafter locations on both sides using Figure K as a guide. Also mark the rafter locations on the floor along both sides of the shed. Next, set the ridge on temporary 2×4 posts and brace it with diagonal 2x4s (Photo above). The top of the ridge should be 76 in. from the floor. Cut a pair of rafters (Figure J) and set them in place to test the fit. Make any needed adjustments, and when you have a pair of rafters that fit perfectly, mark one of them as a pattern. Use the pattern to trace the rafter cuts on the remaining 2x6s and cut out the rafters.
Use dimensions from Figure C (in Additional Information below) to snap lines for the peak. Then cut 2x4s to fit inside the lines and toe-screw them to the plywood to hold them in place while you fill in the center studs (Photo 1) and nail on the siding (Photo 2). Toe-screw from the outside so the screws will be accessible after the siding is installed.
×