Ambitious recyclers build sheds from existing materials, like doors, reclaimed lumber, windows, and the ever-popular crates. If you are on a tight budget but really want a shed, research the DIY projects featured on social media, in books, and home and garden websites like The Spruce. Whatever you decide, try to follow through with the project. You don't need the added stress of a half-finished shed every time you walk out your back door.
Award Winning Designer, Candace Osmond has been in the industry for over a decade. She studied Interior Decorating & Design and is also an accomplished writer and multi-published author. When she's not typing away from the comforts of her desk, Candace can be found travelling to warm destinations, tending to her garden, or enjoying the outdoor haven that is her backyard. Candace currently resides in the breathtaking Maritimes of Eastern Canada with her husband, two beautiful kids and one slobbery bulldog.
When you nail on the siding, make sure it overhangs the framing on each side by 3-1/2 in. and that you’ve trimmed off the top corner to follow the slope of the angled top plate (Photo 2). Attach the siding with 2-in. galvanized or stainless steel ring-shank siding nails placed 8 in. apart along studs and 6 in. apart along the edges of the sheets. You’ll have to nail blocking between the studs to support the top edge of the siding and the Z-flashing.

the biggest problem I had was that the instructions I downloaded from the manufactures web site had a different cut list than the documents that came with the kits. I had already cut the lumber based on the downloaded list so I was dismayed to find that two of the lengths specified in the packaging were longer than the ones I cut from the downloaded plans. I did try assembling an arch with both specs, but nether of the lengths resulted in an arch that actually matched the frame. I wound up forcing things to fit and got the framing up, but it was much harder than it looked and you need at least three people to put it all together.

In order to building a shed, depending on where you are located you may or may not be required to obtain a building permit. A building permit is required so a certified inspector by the town/city/municipality can inspect the construction of the shed to ensure it meets regulations for safety, spacial requirements, and visually. This information can be found by either visiting the town/city/municipality website or contacting the town/city/municipality by phone.

We are preparing to put together our new 8X6 Resign shed on our concrete slab on the side of the house. The problem we are having is that the slab dips lower towards the center for drainage. How do we go about creating a level foundation? What type of foundation would be best and or easiest? This will be both our first times doing a project like this. Any suggestions will help.
Test-fit the pattern rafter and adjust its notches. When it fits accurately all along the beams, use it to mark and cut the remaining rafters. First, cut all the rafters to length. Then clamp together all the rafter stock, including the pattern rafter, edge up. Mark and cut all of the notches to match the pattern rafter. Use a chisel to finish each notch.
Dig trenches about 12 in. wide and about 10 in. below where you want the bottom edge of the joists to end up. Pour 4 in. of gravel into the trenches and level it off. Make sure the gravel in all three trenches is at the same height. Then cut the 6x6s to 12 ft. long and set them in the trenches. Measure to make sure  the 6x6s are parallel. Then measure diagonally from the ends of the outside 6x6s to make certain they’re square. The diagonal measurements should be equal. Finally, level the 6x6s (Photo above and Figure B in project pdfs).

Before beginning to build any foundation for your shed, consult your local building inspector to determine what type of foundation you will need. The decision will be based on the height and size of your storage shed. Regardless of the size of your shed, a building inspector needs to make sure that the storage building is up to code for your local area.
Dig trenches about 12 in. wide and about 10 in. below where you want the bottom edge of the joists to end up. Pour 4 in. of gravel into the trenches and level it off. Make sure the gravel in all three trenches is at the same height. Then cut the 6x6s to 12 ft. long and set them in the trenches. Measure to make sure  the 6x6s are parallel. Then measure diagonally from the ends of the outside 6x6s to make certain they’re square. The diagonal measurements should be equal. Finally, level the 6x6s (Photo above and Figure B in project pdfs).
People are often a little dubious about the capabilities of our plastic shed bases, just because they’re plastic. However, they’re stronger than the majority of other bases available and are certainly a whole lot better looking. These base panels can withstand weights of up to 420 tonnes, meaning not only can they take the weight of a shed that’s filled with everything from garden furniture to bikes and barbecues, they can also withstand the weight of a HGV and pretty much anything else you throw at it!
The plans showed up stapled together, with floor plans, an isometric drawing, and then half of the instructions are for the concrete pad/anchors, with alternative designs for people in wetter locales. Finally there are some pages of general materials advice. It's really a great deal, when some garage plans are 200 bucks. Those, I believe, are a bit more detailed, but then this structure is not meant to be a crazy engineering undertaking. The plans are worth the 30 dollars.
Before you shingle the roof, install metal drip edge. Then nail a row of starter shingles along the bottom of the roof. Install the rest of the shingles according to the package instructions. Before painting, we filled spaces on the exterior with acrylic caulk. Then we rolled and brushed two coats of top quality acrylic exterior paint onto the trim and siding. When all of this is done, your pub shed will be complete!
This tiny red barn is so charming; you may find yourself just wanting to live in it! It looks like it could be a perfect tiny apartment or home. The outside of it is adorable, so if there is just power tools and garden tools inside, they are very lucky to have such a cute home! This is a great shed because it is small enough to remain out of sight but cute enough to want to put it in the limelight.
The creator of this building must have had a sense of what are good garden shed ideas. The shed is unique.  It blends with its surroundings in some ways and in other ways stands out. It blends because the trim is green and matches the greenery around it. But it stands out because its doors and windows are painted red. There is no similar color around it. It is both artsy and natural. IDEA # 11: Think about the colors around your shed then paint accordingly.
A garden shed can be strictly functional, but it can also be a decorative focal point around which you design your garden or yard. These plans will help you build a basic shed, but don’t stop there! To customize your shed, you could create a combination toolshed and greenhouse, put a martin house on top, or use part of the shed for a chicken coop or rabbit hutch. If you’re feeling even more adventurous, you could create a living roof of moss or succulent plants.

These LED rail lights are the perfect, cost-effective way to light up an outdoor space without lightening the wallet. Whether you need a ton of lights for your next garden shed bar party or just a few to light up your child’s playhouse, these lights are great because all they need to use to work is the actual sunlight. No need to worry about batteries or extension cords when it becomes known! They do all the work for you.


If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
Hey guys, We have started our own pub shed here in East Texas called K&K Bear Cave We have been working on it less than 2 weeks and its AWESOME!! We still have a lot of things we are going to do but I have been researching this for quit some time. Here is our FACEBOOK page if you would like to take a look! https://www.facebook.com/KKBearCave Stop in and say Hi and you saw this post, would LOVE to hear from ya!
Need a space to unwind and relax? Turning an old shed into a spa wonderland is not that far-fetched! Space could easily be converted into an area for your hot tub or even turned into a sauna. If you have a hot tub already, it would be easy to use a shed to build a protective covering around it. If you do not have a hot tub, you can start from scratch and turn the outdoor shed into the luxury spa of your dreams!
This whole backyard space seems well put together thanks to the matching wood elements and complementing plant life. This is a great way to incorporate a storage shed into the garden space that does not stick out or look like an actual storage shed. In this case, the storage shed is only made more beautiful by all these complementing elements that work in conjunction.
Whatever technique is more fascinating, it is recommended that you’ve got received a two-inch (5 centimetres) leading all-about the bottom of your garden building. To determine the dimensions of foundation essential for the real creating you intend to construct, incorporate four inches to the whole foundation measurements to make sure an ample basis measurement.
Additional options include ready-built sheds that are shipped completely assembled. Find out if these will need to be finished, sanded, and painted or stained. Prefab and already-built sheds are an attractive concept, but investigate shipping costs. Consider feasibility and logistically how you'll manage the project. Some sheds are delivered by a truck equipped with a crane. Will the crane be able to drive on your property and deliver the building without tearing down walls or fences or plowing over a lawn or garden?
Building a 12×20 shed. Thinking about using 2×8 floor joints and rim board with the joists setting on 6×6 pt timbers tucked under the long 20′ sides with a 20′ 4×6 running parallel in the center. There would be support blocks at the 4 corners and in the center of the 12′ width. Then also in the middle of the three 20′ runs. Total of 9 support blocks altogether with them setting on gravel base ground. Does this sound like a good plan to you?
4. Lay out your 4" x 4" skids properly spaced and lined up on your foundation, making sure they are level. Set the floor frame on top of the skids and measure the diagonals to make sure it's square. At this point, toe nail all joists to your skids using 16d common nails. The joists which fall at the 4', 8', and 12' lengths along your skids should be measured before nailing to make sure they are nailed exactly on center at those distances. This way,
This incredible shed has been transformed into a space center! The space shed has a telescope in it perfect for viewing all the stars at night. This would be the best “playhouse” idea for a kid who is really into science, or even for any-aged space geek who would love to take full advantage of this star platform! I, for one, would absolutely love this space and would probably never leave it!

Omit the bird’s-mouth from four rafters and use these on the ends. Cut the 2x4s for the ridge and subfascia to length and mark the rafter positions on them. Line up the rafters with the marks and nail through the ridge and subfascia with 16d nails to secure them. When the roof frame is complete, line up the subfascia with the chalk line on the platform and tack it in three or four places with toe screws to hold the frame straight while you install the soffit.
×