This garden shed was built to be one of those sheds for sale that stands heads and shoulders above the rest. It was designed to appeal to what is popular in the current age. With a classy dormer roof and modern vinyl windows, it has all the modern eye is looking for. SHEDS IDEA # 19: Order a shed with all the bells and whistles to bring some class to your backyard. Start with filling out our FREE Quote Request Form.
Instead of a garden shed or a tool shed, why not make one of these outdoor structures a workspace? This old-fashioned country shed is excessively gorgeous to just store tools in! Just look at it! From the rustic roof to the adorable side room, this space is a place of inspiration. I can see a writer using this space to draw inspiration from for the latest best-selling novel or simply using it as a space for reflection.
Before you cover the joists with the 4 x 8-ft. sheets of flooring, plumb and brace the 4×4 posts with diagonal 2x4s. Also stretch a string or mason’s line from front to back along the top edge of the outside joist to make sure the walls and joists  are straight. The attic floor needs to be square and have straight sides. If not, the rafters won’t fit correctly.
It is very critical to have a dry and level foundation. It is impractical to build a shed on an uneven foundation. This will prevent the wall sections (simple diagrams for making shed from scratch) from fitting into place when you try to secure them to each other. For sheds which will need to hold heavy items, it is recommended to build a concrete foundation. The two most common methods of building the shed foundation are as follows.
This garden shed was built to be one of those sheds for sale that stands heads and shoulders above the rest. It was designed to appeal to what is popular in the current age. With a classy dormer roof and modern vinyl windows, it has all the modern eye is looking for. SHEDS IDEA # 19: Order a shed with all the bells and whistles to bring some class to your backyard. Start with filling out our FREE Quote Request Form.
Although skids are often set directly on the ground, I prefer to lay them on a bed of gravel. The stone creates a very stable base that’s not likely to settle or wash away. Begin by laying the skids in position on the ground, then mark around each one using spray paint or flour sprinkled from a can. Move the skids out of the way, then use a flat shovel to remove the sod and about 2 in. of soil from the marked areas. Check the excavated areas to make sure they’re close to being level. If they’re not, remove a little more soil from the high spots. Next, add 3 in. to 4 in. of gravel. Compact the gravel with a hand tamper or gas-powered plate compactor, then replace the skids.
The wooden portabase is a time and cost saving base perfect for garden sheds. The portabase is constructed from timber and comes in a range of sizes to suit different garden buildings. The base features spikes on each corner; these spikes can be sunk into the ground offering a stable base for a garden building. You will need to ensure the ground you install your portabase onto is level otherwise your building could end up getting damaged.
Crosscut the remaining joists and fasten them, as noted in the diagram, with joist hangers, joist hanger nails, 16d common nails, or 3½-inch deck screws. Crosscut the floor pieces and screw them to the long and short joists. Make yourself a small jig from scrap lumber to speed accurate spacing between each piece of flooring. Even better, make two. Place one at the front and another at the rear of each deck piece. Fasten the deck pieces with the jig in place. Lift the jigs out, position the next piece of decking, and repeat.
This side shed is a great way to store simple stuff, such as the lawn mower or your garden tools. It almost blends into the scene with the toy beside it and the rich foliage next to it. It is unobtrusive but quite functional, as it will prevent so many tools from either rusting in the rain or being baked in the sun. Overall, these sheds can save you money since all of your garden essentials will be protected.
This backyard shed’s design is a nod to the property’s farmhouse. But beyond its charming shake siding and robin’s egg blue door, the design is practical and savvy. Many of the materials used to build the shed were salvaged from a home renovation. The shed can also be moved, as it is set on concrete piers on gravel and sand instead of a permanent foundation.
We are preparing to put together our new 8X6 Resign shed on our concrete slab on the side of the house. The problem we are having is that the slab dips lower towards the center for drainage. How do we go about creating a level foundation? What type of foundation would be best and or easiest? This will be both our first times doing a project like this. Any suggestions will help.
Double-check the corners and the front posts to make sure they’re plumb. Then cut and install the 4 x 8-ft. sheets of siding. Measure and cut the siding panels so that the seams align over wall studs. Rest the bottom of the panels on a temporary 1/2-in. spacer to provide space between the siding and the drip cap. Nail the siding to the studs. Follow the siding manufacturer’s instructions for spacing and nailing the siding.
By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.
I am planning to build a 20 X 16 shed in my yard in Brandon, FL. I want to be able to pull my truck in to work on it at times. I will be putting it on a Wood deck platform. What it the best ideas for weight support for the 5K Lb. truck? IE: 2X6s, 2X8s what type f spacing is best and which direction should the joists be going in reference to the roll up door? And help would be appreciated.

The plans showed up stapled together, with floor plans, an isometric drawing, and then half of the instructions are for the concrete pad/anchors, with alternative designs for people in wetter locales. Finally there are some pages of general materials advice. It's really a great deal, when some garage plans are 200 bucks. Those, I believe, are a bit more detailed, but then this structure is not meant to be a crazy engineering undertaking. The plans are worth the 30 dollars.
Sixty Stores Ltd is authorised and regulated by the Financial Conduct Authority (FRN 0662525) and acts as a credit intermediary. Finance options are provided by Divido Financial Services Limited in association with a panel of lenders who are authorised and regulated by Prudential Regulation Authority and/or Financial Conduct Authority. Finance available subject to age and status. Terms and conditions apply.
The photos were chosen on the basis of being unique, creative, outstanding, or exceptionally beautiful. They range from rustic to classy and from artsy to frugally-built. Some are very nature-like and blend in with what is around them while others stand out. Whatever the case, they all are meant to, in some way or an other, portray truth, beauty, and goodness.
The amount of rainfall the UK is subjected to each year means that the ground is constantly trying to dry out. When a shed is placed directly onto grass or soil, as some people like to do, when it rains and ground becomes sodden, the shed (or anything heavy for that matter) will start to sink into the ground. This sinking is rarely even, as very often some areas of ground are considerably stronger, or more compacted, than others. This means that as soon as the shed starts to sink, it becomes uneven and, overtime, is left under immense pressure because of this strain.
This lean-to shed features clapboard style siding which is not only easy to install but provides exceptional resistance to rain, wind, and snow. While you can build your shed from brand-new lumber, you could also opt to save money by building your shed from used lumber. The doors appear to be made from tongue and groove lumber but could also be made from pre-grooved plywood sheets that give the same appearance for far less money.
It's important to accurately place the footings, or piers—it makes the build quicker and easier by preventing constant remeasuring and adjustment. We set the four corner piers in rough position and brought them into alignment with a string line. Then we used a tape measure to check the diagonals of this rectangle and to position the fifth and sixth piers relative to the perimeter.
When your shed is too full of tools to park the mower inside, it's time to rethink your strategy. This shed features an extended roof on the left side that creates an outdoor storage area for things like your riding mower, your tiller, or your push mower. Not only does this type of roof add more much-needed storage space, but you can use this shady spot to work on your power tools. The long slope of the roof will easily shed rain, snow, and ice, helping to keep your equipment out of the elements all year long.
This wood shed plan keeps wood open and dry and easy to access. This sort of open firewood shed is good if you live in a place where it stays fairly dry in the winter. If you have a lot of snow, it might be an issue. But overall, this simple, sturdy design of a storage shed plan is a great start. You can easily store a full cord or more in this size of shed.
Stage # 4: Up coming, blend together concrete making use of 1 element cement to five parts ballast or use luggage of dry-mixed concrete that you merely include drinking water. Little portions of drinking water ought to be added during a period and blended to the concrete blend to make certain abnormal quantities are not added in creating the concrete sloppy, because the concrete should to be preserved on the dry aspect.

The post holes should be about 4 feet apart. Set up batter boards and mason's string to mark these points. The intersections of the string indicate the locations of a post corner. Use the 3-4-5 method described above to check for square at each intersection. Adjust the string along the batter boards as necessary and mark the location of the string on the batter boards.
When building the floor frame, which includes the mudsill, floor joists and perimeter band joists, use 2 x 6 or 2 x 8 pressure-treated lumber. Many prefab sheds use untreated construction-grade lumber for the floor frame, which is fine--if you plan to keep your shed indoors. Even in ideal conditions on the perfect site, a shed floor will be exposed to some moisture, and in time, untreated lumber will rot.

When your shed is too full of tools to park the mower inside, it's time to rethink your strategy. This shed features an extended roof on the left side that creates an outdoor storage area for things like your riding mower, your tiller, or your push mower. Not only does this type of roof add more much-needed storage space, but you can use this shady spot to work on your power tools. The long slope of the roof will easily shed rain, snow, and ice, helping to keep your equipment out of the elements all year long.
Most homeowners barely have enough time to keep their homes in shape, never mind their sheds. Heck, I was supposed to paint our downstairs bathroom before the kids got out of school last month. I just picked up the paint yesterday. That's why it's smart to choose low-maintenance materials for your shed. You usually need to pay a bit extra for these, but they'll save you time and trouble in the long run.
Thanks again for reaching out to us. I spoke with our engineering department and your servicing branch. Our sheds are designed for typical storage. Transforming the shed into a livable space voids the warranty. Unfortunately, we cannot facilitate your requests. If you have any other questions, feel free to give our branch a call at (678) 797-5402. Have a great day!
The plans are OK, but I'm pretty disappointed in the customer service. I had my plans destroyed in a rain storm today and was denied any sort of replacement (was wanting a digital copy so I could re-print). Customer service indicated that they were printed only. I would assume this is to prevent people distributing them online, but it's still disappointing.
Flowers are always a good idea when it comes to creating a tiny shed space. No matter what you are turning your shed into, you should be sure to decorate the landscape around it appropriately. Going for a rustic, desert theme? Succulents and cacti are your go-to. Prefer an English garden space? Gorgeous multi-colored flowers and tiny table set up for tea would be perfect.
Ok, now this shed absolutely looks like a tiny house! Everything about it is so adorable! This one even comes complete with quaint little flower boxes at the windows! Talk about charm and being functional! This shed brings the best of both worlds. This shed almost looks like a tiny colonial home all the way down to the tiny wreaths at the front of the door and the tiny chimney up at the top.

Why buy a greenhouse if you can make it yourself? Especially if it is much cheaper? A cool shed like this can be done very cheaply. The main materials needed are old replacement windows, an old door, a few pieces of wood for rafters, and some polycarbonate roofing sheets. IDEA: Rather than throwing away your old windows, door, and other materials, turn them into a greenhouse shed.
This step is easier with two people. Start by measuring the length of the ceiling then cut the amount of straw cladding you need – allow a 5cm surplus.  You will need two lengths.  While one person holds the straw cladding in place the other can nail it in place. Hit the nail in until secure then hammer it at a 90-degree angle so it holds the straw cladding in place.  Put nails in every 15-20 cm to secure.
Now that the floor is completed you can assemble the wall frame on the leveled floor. You can build the wall frames using 2x4 lumbers. The top and bottom 2x4’s are called plates. Place the 2x4 wall studs 16-24 inches apart and nail through the plates and into the wall studs. While the wall frame is still on the ground you can install the siding to make it easier. When the wall is completed rise up and nail it into the floor.
By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.
Some may think sheds are for storage. However, shed use goes far beyond that. Garden sheds can be turned into cute little spaces in the corner of the garden. Some people even turn space into a cute she-sheds or a little living space. These outdoor living spaces are a great place to get away. IDEA #3: Turn your garden shed into personal living space in your garden.
If you have the do-it-yourself skills and an open timeframe, check out the various plans available online or for purchase. Make sure you thoroughly understand the instructions and actually have the ability and tools to do the job. Other sources for sheds include prefabricated buildings that you would order from a reputable company and kits. Some include pre-cut lumber that is shipped to your house. Before ordering, find out if additional milling, drilling, or cutting will be needed, along with necessary tools.

This shed is outstanding because it is built of materials that are still close to their raw form. A wooden shed fits in better with nature. Vinyl sheds or buildings built of other materials, can be can be great for some situations. However for a natural environment wood is much better. First of all wood is a natural product. Secondly it fits better in a woodsy area. IDEA: Just to say you can do it, build a shed with 1) natural products and 2) products that are as much in their raw form as possible.
So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
You’ll need standard DIY tools including a circular saw and drill to build this pub shed. A framing nail gun and compressor will speed up the framing. Since there’s a lot of trim and siding to nail up, we used a coil siding nailer loaded with galvanized ring-shank siding nails. You can rent a coil siding nail gun like this for about $30 a day. A miter saw and table saw aren’t required but will make your cuts more accurate. This is a big pub shed, but it’s no more complicated than a small one. If you have experience with deck building or other small carpentry projects, you shouldn’t have any trouble finishing this pub shed. There are a lot of materials to cut and hoist, though, so you’ll want to round up a few helpers. Expect to spend five or six weekends completing the pub shed.

Hello, I plan on purchasing the 16×24 two story Everest and converting into livable cabin. I am in process of demolishing dilapidated cabin currently on site and then plan on installing footer and concrete slab. There will be 1 bathroom and small kitchen on 1st floor. Do you have any recommendations for slab (4 inch vs. 6 inch)? Any thoughts on best way to run piping? Should I give slab installer any specific directions (anchors, etc.)? Does slab need to be exactly 16×24 or should it be slightly larger? Do I need to send the schematic I prepared showing location of windows and doors?

It is good to consult your local building council and show them your shed foundation plans to check if you need any building permits. This can vary from area to area. Choose the construction site wisely. Make sure it is easily accessible. Check that there are no trees or shrubs growing near the shed. The shed must be situated in an area which receives ample sunlight and air.
Most homeowners barely have enough time to keep their homes in shape, never mind their sheds. Heck, I was supposed to paint our downstairs bathroom before the kids got out of school last month. I just picked up the paint yesterday. That's why it's smart to choose low-maintenance materials for your shed. You usually need to pay a bit extra for these, but they'll save you time and trouble in the long run.

Thank you for visiting our blog. Are you using pavers as blocking or doing a large area with pavers to put your shed on? Either way, we recommend using pea gravel under pavers or blocks for drainage, then leveling by adding more blocks or pavers and avoid building leveling materials going higher than 16”. Can you describe how you are using the pavers under the shed treated floor frame?
No shed, regardless of how well it's built, will last long if it's set on a weak base. Most sheds can be supported by an on-grade foundation, which consists of solid concrete blocks or pressure-treated wood timbers set directly on the ground. The concrete blocks or timbers (aka skids) must be leveled and spaced closely enough to properly support the shed's floor frame. Note that it's important to use solid concrete blocks, not hollow wall blocks, which can easily crack.

Search the hashtage #vintagetrailers on Instagram and you'll discover some 80,000 images of big, small, and mid-sized aluminum travel trailers from roughly the 1950s to 1970s. You might find gleaming silver Airstreams at a lodging rental in Joshua Tree or parked temporarily at a campground near Yellowstone. One trend that hasn't lost steam is the backyard she-shed trailer escape, a dolled-up adult playhouse where women--or men--can escape for alone time or to hang out with friends and a bottle or two of wine.  There's even a Vintage Trailer Magazine for enthusiasts. This vintage Aljo trailer rests in the backyard of a house in Pasadena, California.
In addition to common building materials that you’ll find at most home centers and lumberyards, we used some special products from Louisiana-Pacific (in-depth material details in project pdfs below) that you may have to order if you want to duplicate our pub shed exactly. The windows are shop built using plastic utility window sash that we found at a local home center. Search for “barn sash” online if you can’t find it locally. The swing-up bar door is site built. The entry door on the side is a standard prehung exterior door that’s readily available at most home centers (about $220). The materials for the pub shed cost us about $6,500.

Award Winning Designer, Candace Osmond has been in the industry for over a decade. She studied Interior Decorating & Design and is also an accomplished writer and multi-published author. When she's not typing away from the comforts of her desk, Candace can be found travelling to warm destinations, tending to her garden, or enjoying the outdoor haven that is her backyard. Candace currently resides in the breathtaking Maritimes of Eastern Canada with her husband, two beautiful kids and one slobbery bulldog.

This is another example of surroundings that fit with the garden shed. Actually, it would be more accurate to say that the shed blends and fits with its surroundings. The dark colors blend with the woody area and the darker mulch. The green trim has enough of green to connect at least somewhat with the greenery around it. IDEA # 27: Make your shed blend with nature instead of change the natural setting to fit your shed.


I'm always surprised at how little forethought most backyard builders give to the shed's doors. After all, there's no sense in building a shed to store a particular item, such as a lawn tractor or wheelbarrow, if you can't fit it through the door. I saw a shed recently that had its doors removed. When I asked why, the homeowner explained that he framed the doorway wide enough for his riding lawnmower, but didn't take into account the amount of space taken up by the hinged inset doors. So, he had to remove the doors to fit the mower inside. (He's in the market for a skinnier mower.)
I am building a 20 a 20 foot floor for a workshop in a space under my house so the area is always dry. There is already a crushed stone floor. Can I dig a trench, fill it with stone and lay 4×4’s or 2×4’s on top of it for a foundation? If so, would they have to be pressure treated? Do I even need crushed stone if use pressure treated wood on top of dirt Would concrete blocks or pavers with 2×6 headers be a better idea? Which is the least expensive way to go?

Beauty is powerful. Even in an aged setting or with old material, beauty can still ooze out. In fact sometimes the agedness enhances the beauty. This is especially true with this old shed. While its waterwheel idea and the old wood may go back years, its beauty is still worth crediting. Some of the old things in life make great garden shed ideas. IDEA: Create a garden environment with old things such as a waterwheel.


People are often a little dubious about the capabilities of our plastic shed bases, just because they’re plastic. However, they’re stronger than the majority of other bases available and are certainly a whole lot better looking. These base panels can withstand weights of up to 420 tonnes, meaning not only can they take the weight of a shed that’s filled with everything from garden furniture to bikes and barbecues, they can also withstand the weight of a HGV and pretty much anything else you throw at it!
When building a solid-concrete block foundation, it’s important that all the blocks be level. However, it’s equally important that the blocks in each row be perfectly aligned. The best — and fastest — way to line up the blocks is with a taut string. Install the first and last block in each row. Then stretch a length of mason’s line along the edge of the two end blocks and use it as a guide to set the intermediate blocks..
This little cottage of dreams has an adorable story behind it. These crafters were in need of a workshop and noticed their neighbor getting rid of his small unattached garage, so they inquired about it, before getting some friends and transporting the whole structure to their backyard, where they gave it a complete makeover. Neighborly interactions, a helpful gang of friends, and a cute, flowery cottage? It's almost too good to be true!
If your prehung door has exterior trim, pry it off. The wide trim board running around the shed, under the soffit, will take the place of the top door trim. Place the door in the opening to check the fit. The top doorjamb should rest against the wide trim board. Use wooden or composite shims between the side jambs and the 2×4 framing to square the door frame. Place shims behind each hinge and at the top, middle and bottom of the latch side. Adjust the shims until there’s an even space between the door and the doorjambs on the top and sides. Then drive screws through the doorjambs into the framing at the shim locations to secure the door.

How about scouring the river for a few days to gather wood for a shed? That may sound like a ridiculous and like one of those cool shed ideas. However, it is cheap, out-of-the-box, and likely a possibility for a unique and very rustic garden centerpiece. It may not be classy but why does it need to be. It is definitely an idea with potential for a different kind of beauty. IDEA: Gather some driftwood and turn it into a rustically beautiful garden shed


Omit the bird’s-mouth from four rafters and use these on the ends. Cut the 2x4s for the ridge and subfascia to length and mark the rafter positions on them. Line up the rafters with the marks and nail through the ridge and subfascia with 16d nails to secure them. When the roof frame is complete, line up the subfascia with the chalk line on the platform and tack it in three or four places with toe screws to hold the frame straight while you install the soffit.
×